To Remove The Input Assemblies - VXI VT1433B User Manual

8-channel 196 ksamples/s digitizer plus dsp
Table of Contents

Advertisement

VT1433B User's Guide
Replacing Assemblies

To remove the input assemblies

1
Remove top cover, see "To remove the top cover." Remove the front panel, see steps 1 and 2 in "To
remove the front panel." Note that the following steps are showing illustrations of an VT1433B with a
standard configuration (two input assemblies). If the VT1433B has option 1DL (one input assembly) , the
following steps will be the same except the length of the screws and the number of input assemblies to be
removed.
2
Using a T-10 Torx driver, remove the four screws that attach the assemblies to the bottom cover.
10-18

Advertisement

Table of Contents
loading

Table of Contents