Advertisement
Document No. 586-250
Installation Instructions
Rev. 1, October, 2001
3. Drill holes. The side wall kit plate can be used to
determine placement. Be sure to compensate for
offset that will occur when the plate is placed into
position within the service box.
4. Fit the side wall plate into place and secure with
the three screws included with the kit.
The installation is now complete.
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their
respective owners. © 2001 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you have
comments about this document, please send
them to technical.editor@sbt.siemens.com
Document No. 586-250
Printed in the U.S.A.
Page 2 of 2
Advertisement
