Power On / Off And Mist Adjustment; Low Water Protection: Auto Shut-Off The Humidi Er; Cleaning And Maintenance; Caution - TaoTronics TT-AH026 User Manual

1

Power On / Off and Mist Adjustment

Plug the power cord into a wall socket. Now the humidi er is ready for use.
1. Rotate the Control Knob clockwise to turn on the unit with a click. The LED
indicator will stay solid yellow.
2. Keep rotating the Control Knob clockwise to increase the mist level.
3. Rotate the Control Knob counterclockwise to turn off the unit with a click.
The most comfortable environmental humidity is between 40%-60%. Please
adjust the mist as needed.

Low Water Protection: Auto Shut-off the Humidi er

When there is not enough water inside the water reservoir, the humidi er will
stop misting and the LED indicator will become red. It is designed for safety to
prevent the humidi er from possibly overheating and damaging the atomizer.
09
2 3

CLEANING AND MAINTENANCE

Caution

1. DO NOT submerge the base in water.
2. Make sure water does not enter the base through the air
outlet, air inlet, or the control knob.
3. DO NOT wash any part of this humidi er in dish washer
which will damage the humidi er and void the warranty.

Daily Maintenance

Turn off the humidi er, unplug it from the power source. Drain water from the
tank, reservoir and base.

Weekly Maintenance

1. To properly clean your humidi er, we recommend you to remove scale
and disinfect the humidi er separately.
2. DO NOT mix vinegar and bleach solutions together. Do not use more than
1 tsp. of bleach per gallon of water to avoid damaging your humidi er.
3. Please make sure the sealing ring on the tank cap is installed properly
after cleaning to avoid water leakage.

Scale Removal Instructions

1 2
10