Power On / Off; Mist Adjustment; Warm Mist Adjustment; Sleep Mode - TaoTronics TT-AH018 User Manual

Power On / Off

Tap the Power Button to start (default: medium mist level) / stop misting with a beep sound with each
1. When turned off, although the unit stops working, the fan will continue working for 3 minutes
to avoid generation of mildew in the mist tube.
2. When turned off, the LED display will dim to half of the brightness if there is no operation in 3
seconds.

Mist Adjustment

Tap the Mist Button to adjust the mist output between high / medium / low levels, the mist level
indicator on the LED display will light up accordingly.

Warm Mist Adjustment

Tap the Warm Mist Button to adjust the heat level between high / medium / low levels. When the
heat level is at high level, tap the Warm Mist Button one more time to turn off the heating. The
corresponding warm mist level indicator on the LED Display will light up.

Sleep Mode

1. Tap the Sleep Button to enter sleep mode. The LED display will show "ZZZ".
2. The beep sound is disabled in sleep mode and the LED display will turn off if there is no operation
in 3 seconds. Tap any button (except the Power Button) to wake it up.
3. The unit will enter low mist level automatically, while the mist, humidity, and timer settings remain
functional. The warm mist mode is disabled.
4. Tap the Sleep Button again to turn off the sleep mode with "ZZZ" showing on the LED display.
09

Humidity Setting

1. Tap the Humidity Button to set the humidity level from 30% to 95% with an increase of 5% with
each tap.
2. Once set, the humidity level on the LED display will flash 3 times to confirm your setting.
3. When the humidity level is at 95%, tap the Humidity Button one more time to cancel the humidity
setting, the LED display will show "-- --%".
4. Or you can turn off the humidity setting at any time by tapping and holding the Humidity Button
for 2 seconds.
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as
needed.

Timer Setting

1. Tap the Timer Button to set the timer from 1 hour to 12 hours with an increase of 1 hour with each
tap. Once set, the timer indicator on the LED display will flash 3 times to confirm the setting.
2. When the timer is at 12 hours, tap the Timer Button again to turn off the timer. Or you can turn off
the timer at any time by tapping and holding the Timer Button for 2 seconds.
Low Water Protection: Auto Shut-off the Humidifier
The unit will turn off automatically when water has been depleted. The low water indicator "Err" on
the LED display will light up.

Memory Function

If power is not disconnected, the unit will remember the mist level setting of the last time when it was
turned off.

High Temperature Alarm

High temperature alarm will be activated if temperature of the heat tube is too high, 8 beep sounds
will be heard every other second. The unit will stop working after 1 minute.
Caution: Unplug the power source and wait for 3 minutes to allow the unit to cool down before you
turn it on again.
10