Cooking without Con@ctivity
2.0 (Manual mode)
The cooker hood can be operated
manually if:
– Con@ctivity 2.0 is not activated.
– You have temporarily deactivated
Con@ctivity 2.0 (see "Leaving
automatic mode temporarily").
To switch the fan on
Press the On/Off control .
The fan will switch on at level 2. The
symbol and 2 will light up in the power
level display.
To select a power level
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting B.
For a lower power level, press the
"" control, or "" for a higher level.
Reducing power down from the
Booster setting
If power management is activated
(default setting), the fan automatically
switches back to level 3 after 5 minutes.
Operation (Manual mode)
Selecting the run-on time
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering vapours and
odours in the air.
With the run-on option the fan switches
itself off automatically after a pre-
selected time.
After you have finished cooking,
press the run-on option control 5
15
– Once: the fan will switch itself off
after 5 minutes (5 lights up).
– Twice: the fan will switch itself off
after 15 minutes (15 lights up).
– If you press the run-on option control
5 15 again, the fan will remain on
(5 15 will go out).
To switch the fan off
Use the On/Off control to switch
the fan off.
The symbol will go out.
Switching the hob lighting on/
off
The hob lighting can be switched on
and off independently of the fan.
To do this, press .
The symbol will light up when the
hob lighting is switched on.
21