Table of Contents
Advertisement
Quick Links
LUX URBAN
illuminators installation guide
This installation guide provides instructions for installing the RAYLUX
URBAN series of White-Light illuminators.
Installation Steps
1. Feed cable through bracket solution
2. Mount Illuminator
3. Mount PSU
4. Connect Illuminator to PSU
5. Connect Photocell to PSU
Set Up Steps
1. Locate unit(s) as advised in
lighting design
2. Position unit to provide illumination
down onto a scene
3. If using UBA48 or UBA32 model,
adjust the horizontal angle via
Adaptive illumination™
4. Tighten all fixings
Package Contents
1. Illuminator
2. Power Supply (PSU)
3. Illuminator cable (5m)
4. Photocell cable (5m)
GOLdeN RULeS:
1. ensure PSU lid orientation has
warning label in line with main
input glands
(see PSU diagram, right)
2. ensure operating voltage is
correct for unit being installed
3. ensure PSU is fully water tight
Overview
UBF range
UBa range
RAYLUX URBAN illuminators
PSU
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Raytec RAYLUX URBAN UBA48
Summary of Contents for Raytec RAYLUX URBAN UBA48
- Page 1 LUX URBAN illuminators installation guide This installation guide provides instructions for installing the RAYLUX URBAN series of White-Light illuminators. Installation Steps Overview 1. Feed cable through bracket solution 2. Mount Illuminator 3. Mount PSU 4. Connect Illuminator to PSU 5. Connect Photocell to PSU Set Up Steps 1.
- Page 2 Led output cable 5m (16.4ft) Photocell mounted on bracket, with 5m cable Bracket (not supplied – see optional bracketry – page 5) Led illuminator Adaptive illumination bolt Led output 2 Led output 1 Photocell input Led output 1 Mains input Led output 2 Photocell input Mains input...
-
Page 3: Installation
Installation Feed cables through bracket solution – see page 5 Mount and secure illuminator Typically Column Mounted. Mount PSU – Suitable for inside most general lighting columns (excluding UBA48) can also be mounted ex- ternally. If external ensure glands are facing down. Connect Illuminator to PSU: Installers can extend or reduce lead length using... - Page 4 Set Up Locate unit(s) as advised in Position unit to provide illumination lighting design down onto a scene Max x2 +max 5% uplift If using UBA48 or UBA32 model, Tighten all fixings adjust the horizontal angle via Adaptive illumination™ CAUTION: do not fully loosen AI bolt. Note: Power adjust available if required (see PSU diagrams, pages 8-9)
- Page 5 Technical drawings (Not to scale) Standard Bracketry UBF range UBa Version • Tube outreach 125mm • o/d (outside diameter) 33.7 • i/d (inside diameter) 28 Optional Bracketry Wall Bracket Top Stub Bracket Hockey Bracket • Finished in Silver • Arm o/d 42.4, i/d 39.4 •Arm o/d 42.4, i/d 39.4 •...
-
Page 6: Technical Specifications
Technical Specifications URBAN Series UBA48 UBA32 UBF24 UBF16 UBF8 Consumption <80W <50W <40W <25W <15W Lumen Output* 4700 3100 2350 1600 Colour Temp** 6500K 6500K 6500K 6500K 6500K CRI** 74 - 80+ 74 - 80+ 74 - 80+ 74 - 80+ 74 - 80+ Temp -50˚C to +50˚C... -
Page 7: Psu Specifications
PSU Specifications URBAN Series PSU UBA48 UBA32 UBF24 UBF16 UBF8 AC-100-240 AC-100-240 AC-100-240 AC-100-240 AC-100-240 Input universal<80W universal<40W universal<40W universal<20W universal<10W Fuse 2.5A antisurge 2.5A anti-surge 2.5A anti-surge 1A anti-surge 1A anti-surge Typical Output 4.2A @ 14V 2.8A @ 14V 2.1A @ 14V 1.4A @ 14V 0.7A @ 14V... - Page 8 Power Supply diagrams (Not to scale) STANdARd PSU URBAN UBA48 Model Telemetry Input - requires zero volt, latched input Power Adjust Photocell Sensitivity Mains Input Led Output x2 100V to 230V AC (Polarity Sensitive) Auto-Sensing Photocell Input...
- Page 9 SLIMLINe PSU URBAN UBA32, UBF24, UBF16, UBF8 Models Led output 2 Led output 1 Photocell input Power Adjust Photocell Sensitivity Mains Input...
-
Page 10: Troubleshooting
Trouble Shooting ensure all tests are undertaken by a qualified, trained engineer. ensure safe working practices are followed at all times Step 1: Basics • Check polarity of WHITe-LIGHT Lamp connection red=+ve, black=-ve • Check telemetry link is in • Check photocell is working •... - Page 11 Step 3: Contact RayLed for further assistance Note down: • Model, Angle version + any options • Serial Number of illuminator and PSU...
Need help?
Do you have a question about the RAYLUX URBAN UBA48 and is the answer not in the manual?
Questions and answers