Download Print this page

Science Museum 3823 Quick Manual page 2

Touch screen lock ’n’ safe

Advertisement

Note: If the incorrect code is entered the safe will say "Password is not correct, try again" and the FAIL
light will flash. Enter the correct code repeating the above procedures.
Important: We recommend changing the password to your desired one once you have managed
to open the safe for the first time. Follow the procedures below to change the password.
Changing the Code
You can change the code to another number that you can easily remember.
1. Enter the existing code and open the door.
2. Press the "*" button, the FAIL and OPEN lights will flash and the safe will say "Password please."
3. Enter the new four-digit code.
Note - If you do not enter a new code within about 10 seconds, the FAIL and OPEN lights stop flashing.
Start over from step 2.
4. Press the "#" button to store the new code. The FAIL and OPEN lights will stop flashing and the safe
will say "Accepted".
5. Close the door.
Important
-
If you do not open the door within five seconds, the OPEN light turns off and the safe is locked
again.
-
If the door is kept open for more than 10 seconds, the FAIL light flashes and the safe beeps
twice. Close the door to stop the beeping.
-
If the door is not closed, the safe will keep beeping until the batteries are exhausted. You have to
replace the batteries when the safe is not beeping.
-
The safe will remember and announce, if any, number of failed attempts made to open the safe
when you next open the door. When you open the safe with the correct code, the safe
announces how many intruders (up to 5) have tried to open the door..
-
If the wrong code has been entered three consecutive times, the safe sounds an alarm and
announces "Access denied, who are you?"
Resetting your safe:
If you have forgotten the code the safe can be RESET by removing the batteries, wait for 15
seconds and replace the batteries back in the battery compartment. This will erase all the
stored information and safe can then be opened with the preset code 0-0-0-0.
Please keep the important information for future reference.
2

Advertisement

loading