1. Manuals
  2. Brands
  3. BBV Manuals
  4. Transmitter
  5. Tx1000
  6. Installation manual

BBV Tx1000 Series Installation Manual

Hide thumbs Also See for Tx1000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
BBV
Tx1000
Tx1000 Matrix and Tx1000 Keypad
Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tx1000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BBV Tx1000 Series

Summary of Contents for BBV Tx1000 Series

  • Page 1 Tx1000 Tx1000 Matrix and Tx1000 Keypad Installation Guide...
  • Page 3 Please contact our customer support department if you have any questions/issues: Tel: + 44 (0) 1323 842727 Email: support@bbvcctv.com DISCLAIMER: BBV are not liable for any errors within this manual. If you find an error, please let us know immediately.
  • Page 4 Scan for a quick tour of the BBV website: www.bbvcctv.com...

  • Page 5: Table Of Contents

    Layout of the Tx1000 keypad 10 - 11 Disabling/Enabling the program key 12 - 13 Keypad Functions 14 - 18 RS422 Telemetry Tx1000 Series Alarm Output 20 - 23 Self Test on the Keypad BBV Product List 26 - 27...

  • Page 6: Pre-Installation Checks And Procedures

    Pre-installation checks and safety procedures Unpacking - Inspect the packaging for signs of damage. If damage has occurred, advise the carrier and/or the suppliers immediately. Unpack the receiver carefully and check that all the items are present and correct (see checklist on box). If any item is missing contact the supplier.

  • Page 7: Tx1000 Telemetry Transmitter - Introduction

    Up-the-coax telemetry allows upgrading of static cameras to PTZ without the need for additional cabling. BBV RS422 telemetry is available as standard where up-the-coax telemetry is not suitable or not required. An optional 20mA twisted pair unit (Tx/MK2/TPO) can be retro-fitted to the Tx1000 for complete compatibility with existing Tx1000 sites.

  • Page 9: Technical Specification

    12V dc 1000mA Inputs Data input to base unit is RS232 via 9-pin D connector RS232 port allowing remote control from PC (9600, N, 8, 1) Outputs BBV up the coax BBV RS422 Features 2 keypads supported 2 monitor outputs 8 –...

  • Page 10: Layout Of The Tx1000 Keypad

    Layout of the Tx1000 keypad Installing the Tx1000 Matrix & Keypad Mount the base unit on the wall or in a rack. Connect the keypad to 9 pin D connector to the relevant keypad socket on the Matrix: Monitor 1 – Keypad 1 Monitor 2 –...
  • Page 11 The STATUS LED should flash and the monitors should show the video from Camera 1 on power up. If the LED is permanently ON or OFF , the unit is in a fault condition. Please contact BBV technical support on: 01323 444600. Sitting the keypad remotely from the base unit The keypad uses RS232 9600 baud, no parity, 1 stop bit to communicate with the Tx1000 Matrix.

  • Page 12: Disabling/Enabling The Program Key

    Disabling/Enabling the program key To enable/disable the programming key, press and hold the focus far and focus near buttons and apply power to the keyboard. If the following key is PRESET blue, the programming is enabled. If the following key is red, the programming is disabled.
  • Page 13 Programming the Sequence Holding down the sequence key causes the sequence to run through the list of cameras at the rate of one per second, allowing the operator to quickly determine which cameras are being sequenced. All cameras are included by default. To add/remove a camera from the Sequence, hold the Sequence key and press the relevant camera key.

  • Page 14: Keypad Functions

    Keypad Functions The keypads should not be connected or disconnected from a “live” working unit, as this may damage the RS232 components. TWIST ANTI TWIST TILT UP CLOCKWISE CLOCKWISE ZOOM OUT ZOOM IN Pan, Tilt and Zoom Action LEFT RIGHT Move the joystick in the relevant direction for pan and tilt.
  • Page 15 Self Test To activate the self test feature for any particular camera receiver, first select that receiver, then press the key in the diagram (shown to the right), and then the 2 key followed by the camera button. The screen text will clear and Self Test will be activated. See the RX Series Telemetry Receiver Installation Handbook for more details.
  • Page 16 Please note: The remainder of this manual refers to features found only on receivers that support presets: Rx10X, Rx400P , Rx45X, Rx55X. Presets Go To To select a programmed preset, PRESET Preset enter the number of the preset you would like to move to and Preset Number then press the preset button.
  • Page 17 To Programme a Patrol There is no separate patrol-programming function with the BBV Tx1000 keypad. Once a preset has been programmed, it is automatically included in Patrols 1 and 2. To Remove a Preset from a Patrol Select the receiver on which the patrol is to run.
  • Page 18 Setting a delay for Patrol 1: Menu Then PROGRAM Option Delay Number Setting a delay for Patrol 2: Menu Then Option PROGRAM Delay Number Spare outputs – Control of special receiver functions Four additional spare functions are provided which are used to carry out advanced programming depending on the type of receiver and/or dome used.

  • Page 19: Rs422 Telemetry

    Terminated Un - terminated If the system is to be star wired then a BBV STARCARD can be used which provides 8 individual RS422 outputs. A STARCARD/CONVERTER can be used to allow control of a range of 3rd party domes...

  • Page 20: Tx1000 Series Alarm Output

    Tx1000 Series Alarm Output The Tx1000 matrix has a single RJ45 connector that is used to control BBV RS422 telemetry receivers or a range of 3rd party receivers and dome cameras via a STARCARD/CONVERTER. It is recommended that a RJ45 breakout box and CAT5 patch cable are used to connect the telemetry connector.
  • Page 21 Receivers with local alarms The Rx10X/AL dome interface has 4 local alarm inputs and the Rx45X and Rx55X have 8 local alarm inputs. All have a single normally closed relay output that opens momentarily when a local alarm is activated. This output can be wired to an alarm input on the Tx1000 or an alarm system.

  • Page 22: Self Test On The Keypad

    Self Test on the Keypad The keypad supports a self test for in the field testing. This will enable the services engineer to confirm the functionality on the Tx1000/KBD in the field. To perform this test you will need to make a Loop Back D Type test cable. This is done by shorting pins 2 and 3 on the matrix side, as shown below.
  • Page 23 Notes...
  • Page 24 Notes...
  • Page 25 Notes...

  • Page 26: Bbv Product List

    BBV Product List All of the BBV products are available to view and purchase online: www.bbvcctv.com Tx1000 MK2 The Tx1000 MK2 series combines a video switch with the simplicity of installation associated with coax controlled systems. Tx1500 The Tx1500 series combines a...
  • Page 27 BBV Product List All of the BBV products are available to view and purchase online: www.bbvcctv.com Coax Converter 1 This is a direct replacement for the old Rx10X. Multi Protocol Dome Interface Receiver 12-24Vac/dc. A simple solution to control one of a variety of 3rd Party Dome Cameras.

This manual is also suitable for:

Tx1000 matrixTx1000 keypad

Table of Contents