Exmark SD270SB20 Operator's Manual page 11

1. To start the engine, read the Operator's manual - (1) Park
the machine on a level surface (2) Fill the engine with oil
(3) Move the control bars to a neutral position (4) Start
the engine.
2. Self-propel drive - push the self-propel drive bail forward to
move the machine forward; pull the self-propel drive bail
downward to move the machine backward.
1. Warning—read the
Operator's Manual.
2. Warning—do not operate
this machine unless you
are trained.
116-8648
121–2011
3. Thrown object hazard;
pick up debris before
operating.
4. Warning—keep hands
away from moving parts,
keep all guards and
shields in place.
3. Cutting blades - release the blade control bail (neutral
position) to disengage the cutting blades; hold the blade
control bail against the handle to engage the cutting
blades.
4. Seed hopper on; seed hopper off.
5. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
6. Warning—stop the
engine before leaving
the machine.
11
Safety
7. Warning—stop the
engine and remove
the spark plug wire
before performing any
maintenance on the
machine.