Exmark SD270SB20 Operator's Manual page 10

Safety
116-9985
1. Read and understand
the operator's manual
before servicing this
machine.
2. Positive terminal - red
and blue wires
117–2718
117–4979
1. Entanglement hazard, belt—keep away from moving
parts; keep all guards and shields in place
3. AC terminal - orange
wire connects to engine
harness
4. Negative terminal - black
wire
1. Bypass lever position for
operating the machine
2. Bypass lever position for
pushing the machine
1. Read and understand
the operator's manual
before servicing this
machine
2. Check tire pressure - 13
psi (4x) every 50 hours
3. Grease the slicer shaft
bearings every 25 hours
10
121-6203
3. Read the Operator's
manual
126-0296
4. Check transmission belt
drive tension every 25
hours
5. See engine owner's
manual for service