Download Print this page

Safety Instructions - Jedia JFS-381 Operating Instructions Manual

Fault stand-by amp switcher

Advertisement

SAFETY INSTRUCTIONS

Read all safety instruction before operating the JFS-381.
1. Install equipment as follow conditions.
Install at the place, not bending curved.
Do not install this apparatus in a confined space such as a book
case or similar unit.
The apparatus shall not be exposed to dripping or splashing and
no object filled with liquids, such as vases, shall be place on the
apparatus.
Locate this apparatus away from heat source, such as radiators
or other device that produce heat.
Do not drop objects or spill liquids into the inside of the apparatus.
2. Keep in mind the following when connecting the apparatus.
Connect the apparatus after reading of O/P manuals.
Connect each connection of amplifier perfectly, if not, it maybe
Caused hum, damage, electric shock in case of mis-connecting.
To prevent electric shock, do not open top cover.
Connect the power cord with safety after check of AC power.
This apparatus should be serviced by qualified service person.
FEATURES
1. Stand-By amplifier will be turn on automatically incase main amplifier is
out of order on the way of operatating to announce emergency situation
or important broadcasting.
2. LED indicator will be flashed and buzz will make sound.
3. AC/DC 24V
안 전 사 항
제품을 운용하기전에 모든 안전사항을 읽어 보십시오.
1. 이런 장소에 설치하여 주십시오.
진동이나 경사가 심하지 않고 바닥이 평평한 장소.
통풍이 잘되고 물기나 습기가 많지 않은 장소.
직사광선을 받지 않는 장소 또는 난방기구(발열체)에서 멀리 떨어진
장소.
인화성 물질(화학약품)이 없는 장소.
2. 설치시 이런점을 주의하십시오.
사용설명서 시스템 연결방법을 완전히 읽으신 후에 연결해 주십시오.
각종 연결선을 완전하게 연결해 주십시오.
(주전원 코드를 뽑은 상태에서 연결.)
불완전한 연결은 잡음, 제품의 손상 또는 안전사고의 원인이 됩니다.
전기적 충격 또는 감전사고의 위험이 있으므로 뚜껑을 열지 말아주십
시오.
주 교류 전원 플러그를 연결하기 전에 사용전압을 확인하신 후 안전하
게 연결하십시오.
제품을 수리시는 규정된 부품과 자격이 있는 사람이 수리를 하여야 함.
특징
1. 사용중 주앰프가 고장나면 자동으로 대기 앰프가 동작되어 비상방송이나
중요한 방송시 앰프고장으로 인한 사고를 예방할 수 있음.
2. 앰프가 고장나면 해당되는 LED가 깜박이며 부저음 또한 울리게 됩니다.
3. AC와 DC 24V 겸용사용.
1

Advertisement

loading