WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Remove the screws that secure the video fan (JFAN_2) to the system board.
2
Disconnect the touch-screen cable from the system board.
3
Peel off the tape that secures the touch-screen cable to the video fan
(JFAN_2).
4
Note the routing of the touch-screen cable and remove the cable from the
routing guides on the video fan (JFAN_2).
5
Disconnect the video fan (JFAN_2) cable from the system board.
6
Lift the video fan (JFAN_2) away from the palm-rest assembly.
Removing the fans
computer. After working inside your computer,
After working inside your
cover.
16
computer. For more
Removing the fans
38