VTech Power Pad Precomputer Power Pad Plus User Manual page 67

NEW
NEW erases all program lines from the active program area.
PRINT
Line # PRINT expression and/or character string
The PRINT statement is used to produce output on the display panel. The PRINT command
will print one or several items - either expressions or strings. Each item in the list should
be separated by a comma or a semicolon.
Example:
80 PRINT NAME$; "IS COMING"
230 PRINT "SUM="; A+B+C
READ AND DATA
When it is necessary to enter a lot of information or data into the computer, using the
INPUT statement can be very time consuming. To help out, use the READ and DATA
commands.
Example:
10 DATA 10,60,70,80,90
20 READ A,B,C,D,E
30 PRINT A;B;C;D;E
RUN
10 60 70 80 90
The READ statement consists of a list of variable names with commas between each
variable.
The DATA statement consists of a list of expressions separated by commas.
expressions can be either numeric or strings. The READ statement makes the computer
look up the value of its variables from the DATA statement. When the computer goes
to READ first it will assign the first expression from the DATA list. The next time it goes
to READ it will assign the second value and so on. If the READ runs out of DATA you
will get "? OUT OF DATA ERROR."
63
These