Connecting The V.flash Tm Controller; Connecting To A Vcr - VTech Home Edutainment System User Manual

CONNECTING TO A VCR

If there is no video IN and audio IN terminal on your TV set, you can connect
V.FLASH TM
to a VCR.
CONNECTING THE V.FLASH
Plug the controller into the PLAYER 1 port located on the front panel of
the Main Unit as illustrated.
CAUTION
For safety reasons, turn off the console and remove the power plug from the
electrical outlet before making or adjusting connections. When the power is ON,
please don't insert or eject the V.FLASH
accessories.
- Connect the yellow plug on the V.FLASH
the yellow video input terminal on your VCR.
- Connect the white and red plugs on the V.FLASH
cable to the white and red audio input terminals on
your VCR.
TM
GETTING STARTED
CONTROLLER
TM controller, MEMORY CARD or other
TM
cable to
TM
6