Table of Contents
Advertisement
9
Dismantling
Dismantling can be performed for two reasons:
y
In order to reassemble the device elsewhere.
y
In order to dispose of the device.
If the HKF 8180 is to be reassembled elsewhere, the dismantling process must be prepared
properly. All installation and fastening parts must be carefully dismantled, labelled and, if necessary,
packaged for transportation. This will ensure that, upon reassembly, all the parts can be correctly
assigned and fitted back in the appropriate place.
10 Disposal
10.1 Safety
Incorrect disposal pollutes the environment and the groundwater!
h When disposing of system parts and operating materials, the regulations and guidelines set
down by the legislator of the respective country must be observed.
10.2 Disposal
■
Separate the components of the HKF 8180 into recyclable materials, hazardous materials and operating
materials.
■
Dispose of the HKF 8180 components or recycle them.
05/2013
warning
HKF 8180
note
Version 1.0en
HKF 8180
Page 21
Advertisement
Table of Contents
