Gtech SW10 Replacement Instructions page 2

7
Simply place the new lower lower handle
assembly (knuckle joint first) in the section
at the back of the sweeper.
9
Replace all 11 screws, making sure all the
sides are level are sealed – you can check
this by looking at the charger port and
making sure this is also level.
11
Replace the battery, visor, dust tray and
tubes.
www.gtechonline.co.uk
8
Ensure that the wires connecting to the
battery are fed back through into the
battery compartment before sealing
the unit.
10
Turn the sweeper up the correct way,
and ensure that the lower handle can be
rotated 360º and click in and out of place.
Page 2 of 2