SECTION GENERAL INFORMATION INTRODUCTION PREPARATION FOR OPERATION OPERATING INSTRUCTIONS MAINTENANCE TROUBLE SHOOTING GUIDE ASSEMBLIES, PARTS LISTING & EXPLODED VIEW ...
Page 3
(SAR) Pow Air Vac abrasive recovery system. equipment by blast operators and all personnel within the work site area. The PanBlast™ Pow Air Vac is designed to perform recovery of any commercial abrasive 1.2.2 The compressor must have adequate output...
OPERATING INSTRUCTIONS TROUBLE SHOOTING WARNING! – READ THIS SECTION PROBLEM PROBABLE SOLUTION CAREFULLY BEFORE USING THIS EQUIPMENT Check if the incoming compressed air APPARATUS. supply meets the minimum air supply requirement. Ensure that the 19mm (3/4 ″ ) air inlet ball valve located on the Top Lid is in the isolated Check the breather hole on the closed position.
Page 5
Description Weight BEC-RV-PB-0001 Pow Air Vac Assembly (Includes Items 1~21) 43kg (94.8lbs) BEC-RV-0127-00 Pow Air Vac Top Assembly (Includes Items 1~20) 23.5kg (51.8lbs) BAC-RV-0187-00 Pow Air Vac Top Head (Includes Items 1~17) 18kg (39.7lbs) BAC-RV-PB-0018 Pow Air Vac Drum Clamp Kit (Item22) (Optional)