Instructions For Use - PowerXL HRG2100 Owner's Manual

Instructions for Use

Assembling the PowerXL Indoor Grill & Griddle
1. Place the Drip Tray in the Base (see Fig. 1).
2. Place the Reversible Grill/Griddle Plate in the
Base with the side you want to use facing up
(see Fig. 2).
Conditioning the Grill/Griddle Plate
1. Set the Temperature Control Dial to the off
("O") position. Insert the Temperature Control
Dial fully into the Temperature Control Dial
Socket (NOTE: If the Temperature Control
Dial is not fully inserted into the Temperature
Control Dial Socket, the appliance might not
heat properly, which can result in damage to
the appliance).
2. Plug the appliance into a power outlet.
3. Turn the Temperature Control Dial to a
low temperature setting by turning the
dial clockwise. The indicator light on the
Temperature Control Dial will illuminate.
Allow the appliance to heat up.
Before First Use
•
Remove all packing materials, labels, and stickers.
•
Ensure that the Temperature Control Dial is not
plugged into the appliance. Clean the Reversible
Grill/Griddle Plate, Drip Tray, and Base with a
soft sponge and warm, soapy water (NOTE: Do
not immerse the Temperature Control Probe in
water). Rinse and dry the components well.
Figure 1
Grill
Griddle
4. When the appliance has heated up, the
indicator light will turn off. Spread a small
amount of butter or margarine on the Grill/
Griddle Plate. Wipe away any excess.
5. Turn the Temperature Control Dial to the off
("O") position. Let the appliance cool.
6. Repeat the conditioning process with the
other side of the Grill/Griddle Plate. Your Grill/
Griddle Plate is now ready for use and will not
need to be conditioned again.
NOTE: When using this appliance for the first
time, you may notice a small amount of smoke
coming out of the appliance. This is normal and
is caused by the initial heating of the internal
components.
Power XL Indoor Grill & Griddle | Model: PG-HRG2100
Fig. 2
7