Do you have a question about the Everest Gen7 Pro and is the answer not in the manual?
Questions and answers
Jeff Petter
January 28, 2025
I have a new Everest gen 7 body. Trying to put some of the gen 7 pro items on it. Is there anything that can help with where to put the holes for the finders and roof rack or just trial and error.
1 comments:
Mr. Anderson
February 10, 2025
To determine where to place the holes for the fenders and roof rack on a REDCAT Everest Gen7 Pro body, you can follow these steps:
1. Roof Rack: - Identify the original mounting points for the stock roof rack. - If using a different roof rack, align it in the desired position and mark the new hole locations. - Drill the necessary holes carefully to fit the mounting hardware.
2. Fenders (Bumper Mounting): - Use an eighth-inch drill bit to create mounting holes. - Align the bumper or fender in place and mark the hole positions. - Drill through the marked spots and secure the components with screws.
Make sure the holes are properly aligned before drilling to ensure a secure fit.
Need help?
Do you have a question about the Everest Gen7 Pro and is the answer not in the manual?
Questions and answers
I have a new Everest gen 7 body. Trying to put some of the gen 7 pro items on it. Is there anything that can help with where to put the holes for the finders and roof rack or just trial and error.
To determine where to place the holes for the fenders and roof rack on a REDCAT Everest Gen7 Pro body, you can follow these steps:
1. Roof Rack:
- Identify the original mounting points for the stock roof rack.
- If using a different roof rack, align it in the desired position and mark the new hole locations.
- Drill the necessary holes carefully to fit the mounting hardware.
2. Fenders (Bumper Mounting):
- Use an eighth-inch drill bit to create mounting holes.
- Align the bumper or fender in place and mark the hole positions.
- Drill through the marked spots and secure the components with screws.
Make sure the holes are properly aligned before drilling to ensure a secure fit.
This answer is automatically generated