Usb-Holder And Pedestal Mounting; Installation Requirements; Service Note - BOA 85600 Instruction Manual

USB-holder and pedestal mounting

The two –in the delivery included- accessories will be mounted as followed:
Important note: Please only use the screws included in the delivery! If you will use other screws a
damage of the hardware (PCB) can occur!
Note: The HDD Player can also be connected to a TV. In this case a qualified power supply has to be
used.

Installation requirements

This player can be used in cars with 12 VDC, ground negative. Before the installation please make sure the
power net will have 12 VDC.
While installation please disconnect the negative batterie clamp from the battery to avoid short circuits.
Please compare the connections in the car with the connections of the multimedia-player before you will do the
installation.
The unit is only working with an inserted HDD.

Service note

The unit does not need a service.
To clean the unit only use a dry scarf. Eventually (if the unit is more polluted) you can carefully use a lightly wet
scarf. Never use strong cleaners to clean the unit.
Metric screw PM H D3X8/3X6
Metric screw PM H D3X8/3X6
31
English