Table of Contents
Advertisement
Orion StarSeeker
#8272 StarSeeker IV 114mm Reflector — #8275 StarSeeker IV 102mm Mak-Cass
#8273 StarSeeker IV 130mm Reflector — #8276 StarSeeker IV 127mm Mak-Cass
#8274 StarSeeker IV 150mm Reflector — #8278 StarSeeker IV 150mm Mak-Cass
Francais
➊
Pour obtenir le manuel d'utilisation
complet, veuillez vous rendre sur le site Web
OrionTelescopes.eu/fr et saisir la référence
du produit dans la barre de recherche.
➋
Cliquez ensuite sur le lien du manuel
d'utilisation du produit sur la page de
description du produit.
Deutsche
➊
Wenn Sie das vollständige Handbuch
einsehen möchten, wechseln Sie zu
OrionTelescopes.de , und geben Sie in der
Suchleiste die Artikelnummer der
Orion-Kamera ein.
➋
Klicken Sie anschließend auf der Seite mit
den Produktdetails auf den Link des entspre-
chenden Produkthandbuches.
Español
➊
Para ver el manual completo, visite Orion-
Telescopes.eu y escriba el número de artí-
culo del producto en la barra de búsqueda.
➋
A continuación, haga clic en el enlace al
manual del producto de la página de detalle
del producto.
INSTRUCTION MANUAL
GoTo Telescopes
#8277 StarSeeker IV GoTo Mount
A N E M P L O Y E E - O W N E D C O M P A N Y
Copyright © 2019 Orion Telescopes & Binoculars. All Rights Reserved. No part of this
product instruction or any of its contents may be
Corporate Offices: 89 Hangar Way, Watsonville CA 95076 - USA
Toll Free USA & Canada: (800) 447-1001
International: +1(831) 763-7000
Customer Support: support@telescope.com
without the prior written consent of Orion Telescopes & Binoculars.
IV
™
reproduced, copied, modified or adapted,
IN 542 Rev. C 01/20
Advertisement
Table of Contents
Related Manuals for Orion StarSeeker IV GoTo
Summary of Contents for Orion StarSeeker IV GoTo
- Page 1 A N E M P L O Y E E - O W N E D C O M P A N Y Customer Support: support@telescope.com Copyright © 2019 Orion Telescopes & Binoculars. All Rights Reserved. No part of this product instruction or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of Orion Telescopes &...
- Page 2 Optical Tube Meniscus lens Altitude EZ Finder II tensioning knob Mount arm 1.25" Accessory Battery Collar compartment 23mm Eyepiece Dovetail mounting Focus Star knob Compass diagonal Tripod 10mm eyepiece Collimation Accessory tray Figure 1. Parts of the StarSeeker IV (127mm Maksutov-Cassegrain shown)
-
Page 3: Table Of Contents
The StarSeeker IV GoTo Mount is now equipped with built-in to be returned to Orion for warranty repair, or should you wish Wi-Fi technology to allow wireless control via your smartphone to return the scope under the 30-day return policy. - Page 4 (relectors only) Figure 2. Included components of the StarSeeker IV GoTo telescope. (StarSeeker IV 127mm Mak-Cass shown) should be facing up. Make sure the “V” of each tray arm Also notice the altitude axis tensioning knob near the top of the is against a tripod leg.
-
Page 5: Learning To Use The Ez Finder, Eyepieces
scope. This allows you to observe in positions that are more comfortable than if you were to look straight through the tele- scope. A diagonal is not used with Newtonian reflectors; none is included with the StarSeeker reflector models. To attach the star diagonal: Remove the protective dust cap from the 1.25"... -
Page 6: Eyepieces And Magnification
near the rear of the sight. The 3V lithium battery provides the power for the diode. For the EZ Finder II to work properly, it has to be aligned with the telescope. When the two are aligned, a celestial object that is centered on the EZ Finder II’s red dot should also appear in the center of the telescope’s eyepiece. - Page 7 Figure 7. Attaching the star diagonal (Maksutov-Cassegrain models only). Retaining Battery clip ("+" side up) Figure 9. a) Open the battery compartment by lifting the tab. Place the battery under the retaining clip with positive “+” side up. Figure 8. Inserting an eyepiece into the diagonal of a Maksutov- Cassegrain.
-
Page 8: Focusing
500mm = 22x Red dot 23mm The magnification provided by the 10mm eyepiece is: 500mm = 50x 10mm Although the power can be varied, each instrument under aver- age skies has a limit to the highest useful magnification that can be achieved. -
Page 9: Powering The Starseeker Iv Mount
AC-to-DC adapter or a 12V DC field battery such as the Orion Dynamo Pro. A DC car-lighter style cable is provided with your telescope to connect a 12V field battery to your mount. -
Page 10: Collimation
Note that the StarSeeker IV telescopes come with a “quick col- Connecting to the SynScan Pro App limation cap” (shown in Figure 2), which is used in the col- In the SynScan Pro app, tap Settings > Wi-Fi Setting. limation procedure. Also, you’ll notice that the primary mirror •... - Page 11 Figure 16. a) The Free SynScan Pro app lets you control the StarSSeeker IV mount from your iOS or Android phone or tablet. An optional SynScan hand controller can be purchased to control the mount, if desired.
- Page 12 A N E M P L O Y E E - O W N E D C O M P A N Y Customer Support: support@telescope.com Copyright © 2020 Orion Telescopes & Binoculars. All Rights Reserved. No part of this product instruction or any of its contents may be reproduced,...