Table of Contents
Advertisement
Once paired with the AirBase, headsets could make calls freely any time without
having to re-pair again, as long as these headsets do not pair with other
Bluetooth devices such as the Bluetooth enabled cell phones afterwards. Any
headset that pairs with another Bluetooth device after it has paired with the
AirBase would have to re-pair with the AirBase before it could again initiate
outgoing calls. Alternatively, if the headset happens to be the last one, which
previously connected to the AirBase, then, pressing the "Connect" button would
suffix.
Incoming calls to the AirBase are only diverted to the headset that last connected
to it – for the purpose of receiving an incoming call; dialing out for an outgoing
call or, it was just for pairing. To ensure that incoming calls are to be diverted to a
specific headset that has previously been paired, re-registration of the headset
with the AirBase is required. Simply press the multifunction button on the headset
twice: first for connecting to the AirBase; second for disconnection. This would
complete the re-registration process.
IX. Disclaimer
This user manual is published for the operations of a Bluetooth enabling product
used in conjunction with a normal house phone cordless or otherwise. Materials
present in this user manual are furnished for informational use only, which is
subject to change without notice. We assume no responsibility or reliability for
any error or inaccuracy that may appear in the manual.
Responsible Party's Name:
BluePacket Communications, Inc.
1759 S. Main St. Ste 120
Milpitas, CA 95035
Tel:1-408-946-6058
Fax:1-408-946-6084
US Service Center:
1759 S. Main St. Ste 120
Milpitas, CA 95035
Tel:1-408-946-6058
Fax:1-408-946-6084
Advertisement
Table of Contents
