Table of Contents
Advertisement
2. Hook up the AirBase (RJ11 next to the power jack) to the phone using the
phone cord provided.
3. Hook up the original phone line to another phone jack (the other RJ11) on
the AirBase.
4. Connect the AirBase' s power supply to a receptacle that provides an 110V
source with 60 Hz.
III. Changing AirBase PIN Code
The AirBase has a factory pre-programmed, default PIN code '0000' . If your
Bluetooth headset has the same PIN code, you don' t have to change it before
doing pairing. In that case, please directly refer to next section. Otherwise, you
have to update the PIN code of the AirBase prior to pairing with your headset.
To change the PIN code of the AirBase, first, you have to press and hold
"Connect" button for about 5 seconds. When both LED1
can then release the button. The AirBase is now in the PIN-code-entry mode,
which is characterized by the following scenarios:
1
LED1 is the upper one that displays red light.
2
LED2 is the lower one that displays green light.
1
2
and LED2
are on, you
Advertisement
Table of Contents
