Related Manuals for 4NSYS FORVR450
Summary of Contents for 4NSYS FORVR450
- Page 1 DIGITAL VIDEO RECORDER MANUAL Digital Video Recorder POWER STATUS AUDIO MENU QUAD Digital Video Recording System 450A_ENG_1.1 Digital Video Recorder...
-
Page 2: Important Safety Instructions
MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER?S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. - Page 3 MANUAL FORVR450, Hi-tech 4ch standalone Digital Video Recorder, is introduced by 4NSYS who presents more than 10 years of experience and know-how specialized in developing video surveillance technologies. The system is in capable of high quality data recording in max. 120fps, and allows user to monitor and control remote site DVR via network connection.
- Page 4 MANUAL The parts supplied with the product can be different depending on the model. POWER STATUS MENU AUDIO QUAD Digital Video Recording System 4CH DVR (DVR unit) EMERGENCY SPLIT MENU AUDIO BACK UP EMERGENCY SCHEDULE Adaptor Remocon controller Power cord Manual AAA TYPE S/W and manual...
- Page 5 MANUAL The system can record max. 4ch incoming asynchronous video data and allow various screen display of recorded data through AV and VGA monitor outputs. Using internet line connection, user can access remotely located DVR, and monitor local sites, control unit functions and search recorded data. SPOT OUT Audio input Audio output...
- Page 6 MANUAL POWER STATUS AUDIO MENU QUAD Digital Video Recording System 14 15 REW Button USB interface To see reverse playback To backup data or upgrade system firmware [Note] Only USB memory stick is connectable to USB port. Other USB interface devices connection may cause SEARCH Button system malfunction.
- Page 7 MANUAL MODEL : ADT450 CAUTION POWER DC 12V. 3A VIDEO - G C E G S4 S3 S2 S1 LOOP SPOT OUT RS-485 ALARM OUT/IN S-VIDEO POWER DC 12V MAIN OUT Mouse : PC mouse port Audio Input: Input for each channel audio Audio Output: Output for audio stream SPOT T : Video output connector for another monitor display of selected channel Video Input: BNC Video input for each camera channel...
- Page 8 MANUAL User can install the HDD into DVR, but, since there are many parts and factors inside the product, it requires special care in case of wiring and connections. Otherwise it may cause electric shock, troubles, faults on the product and etc. Further improper HDD installation may generate HDD detection problem or improper operation, so it is advisable initial HDD or additional HDD installation work should be handled by authorized engineer from the agent where the product was purchased.
- Page 9 MANUAL 2. Connect data bus cable to the board bringing the red part of the cable in touch with the groove on the connector 3. Unscrew the pieces from the HDD rack to mount the HDD in case of two HDDs installation (Refer to below ‘Second HDD installation’) One HDD installation Install HDD on front side and set HDD as “Master”...
- Page 10 MANUAL By using this easy to carry remote controller, user can use all the functions of FORVR450 and can separately control multi numbers of DVRs installed in the same place. SEARCH SPLIT MENU AUDIO BACK UP EMERGENCY SCHEDULE ID Button : By assigning DVR ID, it allows the user to control multiple DVRs with one remote controller.
- Page 11 MANUAL 1. Confirm system ID (Default set as “01”) => How to confirm system ID: MENU > SYSTEM INFORMATION > REMORE CONTROLLER ID 2. Assign separate ID in order to control multiple systems (Max. 99) 3. Select “ID” button and press number (ID no.) The number must be identical to the ID to call. (“SELECTION REMOTE ID”...
- Page 12 MANUAL For those users who are accustomed to use PC mouse more than buttons, the system provides PC mouse connection port to control the system [Note] Connect mouse before the system Power on or reboot the system after connecting the AUDIO AUDIO MOUSE...
- Page 13 MANUAL When the system turns on, it will show FORVR 450 booting screen together with relevant information. System information and HDD information will display followed by network information on the screen. Screen display mode, Version, Video mode information ㆍ Model: Model name ㆍ...
- Page 14 MANUAL The menu can be configured by using the front button or the mouse. Because it sets up the overall setting of the system, you should be familiar with it. ▶ How to open the menu with the front button. There is the “SETUP”...
- Page 15 MANUAL Remote ID ID type remote controller is provided with DVR. By using one remote controller, user can control multi DVRs (Max. 99 units). Mouse resolution It displays the sensitivity of mouse movement. It can be adjusted as per the user’s conveniences.(default: 1) (Moving speed is slow) 1<2<3(Moving speed is fast) Language The language being used on the system can be changed.
- Page 16 MANUAL If you change the time setup, “HDD data can be erased” message will show up. For example, if you delay the time by 10 minutes, the overlapped 10minutes data can be deleted. Time: It setup the time and displays from front, hour: minute: second Date: It setup the date and from front, year : month: day Date format Since the time display could be different by each country, select the format you want.
- Page 17 MANUAL This is used to important system changes such as HDD format or lock. How to change the password • System Password Factory default(1111) or user password. • New password Input the new password using the numeric key 1-4. (System password can be entered by combining 1-4 only) •...
-
Page 18: Hard Disk Format
MANUAL If you select 1, 2 HDD information display mode, it shows the model name, size and used space of HDD. • NO : HDD1, HDD2 • FORMAT : LDV-S802 • SIZE : 152GB • USED : 37% “+” mark : It shows the Record setup HDD. HARD DISK FORMAT You can format the newly installed HDD or the existing HDD currently in use. - Page 19 MANUAL This is used when the user wants to reset the unit to the factory default. (Refer to the appendix for the factory default) [Change sequence] DEFAULT SETUP → PASSWORD INPUT → O.K FORVE450 is designed to make a firmware upgrade in case of the function changed or, a new function added. Save the firmware file (FVR450A.BIN) into Insert the memory stick to the USB port the memory stick.
- Page 20 MANUAL Select the “6.UPGRADE” from the system menu. [Upgrade procedure] Menu >> Basic setup >> Upgrade >> System password >> Proceed >> Warning message >> Select Menu button. [Note] Note for while upgrading. ㆍ Do not remove the memory stick while upgrading. ㆍ...
- Page 21 MANUAL Device / Capacity: ㆍ Device: It display format type of USB MEMORY STICK ㆍ CAPACITY: display total USB memory storage (Not remaining storage) Select the Channel to be backed up. Select the backup starting time. Select the backup end time. If the setup is completed, click “NEXT”.
- Page 22 MANUAL It shows the back up size of the set time. Note Check the backup size and the memory space. If the backup size is larger than available memory space, you have to use the bigger memory stick or reduce the backup image size to fit the memory stick. ㆍ...
- Page 23 MANUAL After confirming selected backup time press ‘NEXT’ to start backup. (Refer to BACKUP page of manual) The button lock asks the password every time when you control or, modify the system. • Select ON: Enable button lock. • Select OFF: Disable button lock. Digital Video Recorder...
- Page 24 MANUAL The display menu can control the display related items such as displaying OSD, picture split etc. Set it up properly according to the user’s purpose. SCREEN The display menu can control the display related items such as displaying OSD, picture split etc. Set it up properly according to the needs of the user.
- Page 25 MANUAL OSD A TYPE 2006/05/31 13:38:42 CAM1 CAM2 CAM3 CAM4 OSD B TYPE CAM1 CAM2 2006/05/31 13:38:42 CAM3 CAM4 OSD C TYPE CAM1 CAM2 2006/05/31 13:38:42 CAM3 CAM4 OSD D TYPE CAM1 CAM2 CAM3 CAM4 2006/05/31 13:38:42 Digital Video Recorder...
- Page 26 MANUAL The factory default of channel split is quad. If you press the SPLIT button, the picture shows up as a quad but, it can be changed to the other asymmetric split. If the user needs careful monitoring, this can be used effectively. There are seven different split mode to select and the position can be changed among A~D.
- Page 27 MANUAL QUAD-1 A Type B Type 13:38:42 2006/05/31 CAM1 CAM2 CAM1 CAM2 CAM3 CAM4 2006/05/31 13:38:42 CAM3 CAM4 C Type D Type CAM1 CAM2 2006/05/31 13:38:42 CAM1 CAM2 CAM3 CAM4 CAM3 CAM4 2006/05/31 13:38:42 QUAD-2 A Type B Type CAM2 2006/05/31 13:38:42 CAM1...
- Page 28 MANUAL 3WAY-2 A Type B Type 2006/05/31 13:38:42 CAM1 CAM2 CAM2 CAM3 CAM3 CAM1 2006/05/31 13:38:42 C Type D Type CAM1 2006/05/31 13:38:42 CAM2 CAM2 CAM3 CAM1 CAM3 2006/05/31 13:38:42 3WAY-3 A Type B Type 13:38:42 2006/05/31 CAM1 CAM2 CAM1 CAM3 CAM2 2006/05/31...
- Page 29 MANUAL Auto sequencing is the sequential screen display for the effective monitoring. Press the SEQ button to use. Auto loss skip: It is setup for the skipping channel if there is the no camera input. Sequence Mode: It is setup whether to show the channel as a sequence mode. ㆍFull: It shows the full screen sequentially.
- Page 30 MANUAL The SPOT function enables to display a specific or, the entire channel in sequence on a separate monitor. It is possible to set the channel hang on time as well. By using two different monitors, one for the live and the other as a SPOT, specific or the full channel can be displayed in sequence.
- Page 31 MANUAL The menu provides user to setup camera title, screen display adjustment, PTZ camera. CAMERA This is the setup for camera name. If you click the channel from the picture A, the virtual keyboard will be displayed to enter the name as per the picture B. Use the direction key to enter the name.
- Page 32 MANUAL There are many different kinds of cameras and the image varies such as bright or dark. To see the most desirable camera images, you can setup the color configuration here. To compensate the color, select the channel as per the picture A. The control window is displayed on the image B of the currently selected channel to adjust the color.
-
Page 33: Pan/Tilt Camera Connection Diagram
MANUAL The PTZ camera can be controlled by this system without any extra equipment. RS-485 communication is used for PTZ camera control and ID is given for parallel connection. It is easy to set up this system and control the PTZ by seeing its movement through the monitor. For multi connection of Pan/Tilt camera, please refer to the following diagram. - Page 34 MANUAL 1. Press the SET UP button on the front panel to go to PTZ on the CHANNEL menu. 2. As shown at the below, configure PROTOCOL, ID, BAUD on the channel with PTZ installed. • Supported PTZ camera models. - PELCO-D - PELCO-P - LG MULTIX...
-
Page 35: Picture Size
MANUAL It is the setup for record resolution and frame rate of each channel. Since the resolution and picture quality are different by the setting, so configuration should be set with care. RECORD PICTURE SIZE Picture size: It sets the video resolution. The frame rate depends on the resolution as higher resolution lead lower frame rate and lower resolution setup enable higher the frame rate selection. - Page 36 MANUAL PRERECORDING It is for the prerecording setup. If this function is not used, the event recording has no meaning. If the object has already passed but the recording started after, we cannot distinguish(analyze) the situation correctly. Therefore, the system should have the image before the incident happen as an evidence. - FORVR 450 has the recorded video image before 5seconds but, it depends on the resolution and frame rate.
- Page 37 MANUAL PRE : It moves to the previous page. PAGE : It shows the current LIST page. COPY NEXT DAY To apply the same setting to the other day, select the COPY NEXT DAY and select the day for applying the same setup.
- Page 38 MANUAL To configure motion detection area, sensor, alarm and etc. ALARM This is the representative function of DVR system. It records for a specific time only when it detects the motion. Also the sensitive can be selected, so it can record motion from sensitive motion to the large movements through control.
- Page 39 MANUAL Select the channel to detect motion Zone ㆍ ALL: motion detection applies to the whole area ㆍ OFF: disabled ㆍ AREA: Select area to be detected. [Setup] Motion zone is displayed on the selected area as shown at the picture 2. Select area by moving the cursor.
- Page 40 MANUAL ‘EVENT’ menu sets alarm, sensor and motion, which is the advanced feature not part of the general CCTV features. When setting the recording by event, the mass storage device may not be necessary. If the user uses this feature well, the DVR feature can be also maximized with the low capacity storage device only.
-
Page 41: Event Display
MANUAL Alarm out time: Set alarm relay out time ㆍ OFF: No use (No alarm will relay out even Alarm out is On) ㆍ Range: Selectable range is available between 1sec ~ 30 minutes. Note: Alarm dwell time is to control time for external device. It is not built-in buzzer of the system. The setup alarm dwell time should be more than 2 seconds at least. - Page 42 MANUAL It is about network configuration to remotely control or monitor local DVR. This page should be referred when remote connection is not accessed. NETWORK AUDIO AUDIO MOUSE MOUSE TX+ TX- G C E G S4 S3 S2 S1 RS-485 ALARM OUT/IN RS-485 ALARM OUT/IN S-VHS S-VHS...
-
Page 43: Ip Information Setup
MANUAL After the installation according to the architecture drawing, the network on the system should be set to enable the remote cotrol and monitoring possible. DHCP function There are only dynamic IP users in the internet environment. The address is continuously changing since it is not a static IP. -
Page 44: Network Password
MANUAL Notes • IP Address This is the unique name of device in TCP/IP network. This is an expensive internet line which is normally used for servers. If you are using a static IP, enter the IP address. • Subnet Mask Has 32Bit length figures to decide the number of bits used as network address in IP address (= Address mask) •... -
Page 45: E-Mail Setup
MANUAL NOTIFICATION It is an E-mail notice function when events happen (Alarm, Sensor, Motion detection, video loss, Power Off or Password change). It is a very convenient function to notify the system formation even if the user is not in the local area. - E-MAIL SETUP: Email information setup. -
Page 46: Email Notification
MANUAL [2] E-MAIL NOTIFICATION ALARM ON Setup the email notification On/Off and time. The time setup is for the interval of sending the e-mail ㆍ ON: Enable email notification. ㆍ OFF: Disable email notification. ㆍ Time configuration: Setup the time for sending notification in every 10mins/30mins/1hr/12hrs/1day. Note If the user selects to enable the E-mail notice “ON”... -
Page 47: Video Loss
MANUAL VIDEO LOSS Setup the e-mail notification On/Off when the video signal is lost. - ON/OFF: To enable or disable. ADMIN PW CHANGED Setup the e-mail notification On/Off when the admin password changes. - ON/OFF: To enable or disable. POWER ON Setup the e-mail notification On/Off when the system power On. - Page 48 MANUAL It provides various methods of search such as Time, motion and sensor recording. It is recommended user should be familiar with the function for it is frequently used. SEARCH QUAD To search video file, press “SEARCH” buton. Various data search ㆍ...
- Page 49 MANUAL Data search by Time / Date setup Select date you wish to search data desiring search data Select time you wish to search Press “SEARCH” to start playback after Date and Time setup Note: NO DATA displays when no recorded data is acailable It searches by a certain event (motion, sensor and etc.), which is the most commonly used one in the field.
- Page 50 MANUAL Select date you wish to search data desiring search data Select channel Select type of event ㆍ Video loss: Search for video loss ㆍ Emergency: search for video with emergency recorded data ㆍ Continue: Search for data recorded by schedule ㆍ...
- Page 51 MANUAL It provides how to listen to audio sound on live or playback AUDIO Listening to audio sound Listening to audio sound during live or playback can be controlled only by ‘mouse’ or ‘remote controller’ (No buttons on DVR unit) Press “AUDIO”...
- Page 52 MANUAL It is to monitor, playback or to change setup as well as system connected cameras of remotely located DVR via internet or network connected PC. On web monitoring site (www.cctvsite.net), user can monitor multi DVR systems. Minimum requirement Recommended spec ㆍCPU: Pentium4 1GHz or higher ㆍCPU: Pentium 4 2GHz or higher ㆍMemory: 128MB or higher...
-
Page 53: Network Setup
MANUAL SETUP NETWORK SETUP To change IP/DNS and PORT CONNECT SETUP AND LOGIN ㆍ IP/DNS info setup: Enter IP information if it is static IP ㆍ PORT: Enter PORT no. as set in DVR SYSTEM ㆍ ID: Enter user ID (admin or user) ㆍ... - Page 54 MANUAL SEARCH SEARCH [Event search] 1. Select date 2. Select channel 3. Event search: Select type of event you wish to playback and click “Search” ㆍALL: Search all events ㆍContinue: Search continuous data ㆍMotion: Search motion data ㆍSensor: Search sensor recorded data ㆍEmergency: Search emergency data ㆍVideo loss: Search video loss data 4.
- Page 55 MANUAL [Caution] How to use playback button -> During Search or Backup data playback, PLAY, FEW and REW buttons are used only. -> Network status may affect FEW or REW playback speed, and improper channel display may occur. Pan/Tilt POWER: ON or OFF PTZ connected external power IRIS: Camera IRIS ON or OFF WIPER: Button to ON or OFF use wiper LIGHT: Button to control camera image light...
- Page 56 MANUAL SETING SETTING [RECORD] ① ② ③ ④ ⑤ ⑥ 1. Picture size -> Set the resolution of the recorded image 2. Pre-recording -> It starts recording 5 seconds before the event 3. Quality -> Selecting image quality level 4. Frame rate ->...
- Page 57 MANUAL [SCHEDULE RECORD SETUP] ① ③ ④ ② ⑤ ⑥ ⑦ ⑧ 1. Date selection : Select schedule date 2. Time setting : Set per each time schedule 3. Channel selection : Select channel 4. Event setting : Select type of event you wish to apply [Note] Event selecting….! ㆍNONE: No event selection...
- Page 58 MANUAL [ALARM/SENSOR] ① ② ③ ④ 1. Alarm mode (Alarm relay out setup) : Select type of event on the list [Note] Event selecting….! ☞ OFF: No alarm (Default) ☞ Sensor: Alarm by sensor detection ☞ Motion: Alarm by motion detection ☞...
- Page 59 MANUAL [MOTION SETUP] Motion setting cannot be changed on client software as allowed on local DVR menu [VIDEO ADJUST] ① ② ③ ④ There are many brands of camera, and some of their images are seen too dark or light. The functions are to compensate and optimize the image through color adjustment against each camera.
- Page 60 MANUAL [HARD DISK] Remote menu access to recording setup is not allowed and it is to eliminate any possible cause may negatively affect operation status of DVR. Auto Delete: The function is to keep data only for specific period. ㆍ Off: No use ㆍ...
- Page 61 MANUAL Visit http://www.cctvsite.net site for joining member It will automatically select default language according to OS. User can manually select language on the site. Click ‘JOIN’ on member login site and fill up the form. (Space with ‘v’ mark is basic information to provide information service, so the information must be provided) *Above user information is only for sample capture Digital Video Recorder...
- Page 62 MANUAL After member join, login the site by entering ID and Password. Click ‘MY DVR LIST’ to see registered DVR list. Click ‘Register’ button and enter product information Digital Video Recorder...
- Page 63 MANUAL Site name: Enter site or DVR name Description: Describe about the site in brief Autologin: Select ‘Use’ or ‘Not use’ ※ Use: When you login the registered DVR, you are automatically connected. ※ Not use: It requires "ID" and "Password" whenever login. Web code: The information must be entered correctly and identical to the code on DVR (MENU ->...
- Page 64 MANUAL In order to use web monitoring functions, separate software is not necessary, user can access to local DVR to monitor, playback, control settings and backup simply on PC monitor with internet connection. (Note: Multi monitoring screen doesn’t provide playback, setup change, backup, and PTZ control function) To use web monitoring functions, you are requested to join member and register DVR (Refer to 19.2 PRODUCT REGISTRATION page) on the list.
- Page 65 MANUAL How to use Multi web view Web View GUI - Display max. 4 DVRs (16 channels) on the screen - Double click a channel to enlarge - Convert split mode by click Multi view image icon. Digital Video Recorder...
- Page 66 MANUAL Appendix Default settings Remote ID Information Mouse Resolution Language English Date Format YYYY/MM/DD Time/Date Time Correction +00Sec/Mon Daylight Saving System Password 1111 Overwrite Hard Disk Record HDD HDD1-2 Auto Delete Backup Backup Channel 1-4 Button Lock Display Time Date Title Transparency Border Color...
- Page 67 MANUAL Picture Size 360X240 Prerecording Channel Quality Frame Audio Record Normal 15F/S Normal 15F/S Normal 15F/S Normal 15F/S Record Time Channel Event 00:00 - 00:00 NONE Schedule Channel Title CAM1 Camera Title CAM2 Channel CAM3 CAM4 Channel Video Adjust Channel Protocol Baud PELCO-D...
- Page 68 MANUAL Models compatible with the USB The following is the list of compatible USB memory sticks and the HDD devices for the DVR product. Other models may be also compatible and the names of the verified products are as follows: •...
- Page 69 MANUAL HDD storage capacity table Recording Time (Hr) Aver. Audio Size Resolution (Kbytes/ Quality (NTSC/ Frame size (kbytes/ Video Video+Audio (NTSC/PAL) sec) size(GB) PAL) (byte) sec) (NTSC/PAL) (NTSC/PAL) (NTSC/PAL) 30/25 1024 30/25 579/694 543/643 15/12.5 1024 15/12.5 1157/1389 1021/1197 Lowest 7.5/6 1024 7.5/6.25...
- Page 70 MANUAL Recording Time (Hr) Aver. Audio Size Resolution (Kbytes/ Quality (NTSC/ Frame size (kbytes/ Video Video+Audio (NTSC/PAL) sec) size(GB) PAL) (byte) sec) (NTSC/PAL) (NTSC/PAL) (NTSC/PAL) 15/12.5 3072 45/37.5 386/463 369/440 7.5/6 3072 22.5/18.75 772/926 709/837 Lowest 3072 9/9.36 1929/1855 1578/1528 3072 4.5/4.5 3858/3858...
- Page 71 MANUAL The estimation of backup speed Setup Normal Picture quality Record (CH1, CH2, CH3, CH4 all same) 30 F/S Frame rate (CH1, CH2, CH3, CH4 all same) Backup Tested result y t i The search time of HDD capacity 25 minutes 36 seconds (828 KB/S) Digital Video Recorder...
- Page 72 MANUAL MODEL 4CH DVR Video Output Audio Alarm Up to 120 fps @ 360x240 NTSC Up to 60 fps @ 720x240 Up to 30 fps @ 720x480 Image Rate Recording (/Sec) Up to 100 fps @ 360x288 Up to 50 fps @ 720x288 Up to 25 fps @ 720x576 Pre Recording Playback Function...