Cleaning Instructions For The Semak Pie Warmer; Spare Parts For The Semak Pie Warmer - SEMAK PW50 Operation And Warranty Booklet

Cleaning Instructions for the Semak Pie Warmer

1. ALWAYS turn off the appliance and allow it to cool down before cleaning.
2. Use a barely damp cloth to wipe the machine once it has cooled.
3. Remove glass panels, shelves and crumb tray for cleaning. DO NOT place hot
glass panels in cold water as they may shatter.
4. DO NOT hose out the inside of the machine. Wipe the interior with a damp
cloth.
5. DO NOT use caustic substances to clean the warmer and do not allow caustic
substances to make contact with any electrical components of the warmer.
6. Ensure that all parts of the warmer are properly dried before replacing them in
the appliance.

Spare Parts for the Semak Pie Warmer

Part Number Description
50010 Element suit 50 capacity
50020 Element suit 100 capacity
50030 Heat Control
50040 Heat Control Knob
50050 Door Handle
50060 Glass Door 50 capacity
50070 Glass Door 100 capacity
50080 Crumb Tray 50 capacity
50090 Crumb Tray 100 capacity
50100 Wire Rack 50 capacity
Spare Parts, exploded views and wiring diagrams are available from our webpage. Go
to www.semak.com.au and locate the appliance in the product section for the above
information.
Part Number Description
50110 Wire Rack 100 capacity
50120 Temperature Gauge
50130 Lead & Plug
50140 Glass Rear 50 Capacity
50150 Glass Rear 100 Capacity
50260 SS Door 50 Capacity
50270 SS Door 100 Capacity
50280 SS Rear Panel 50 Capacity
50290 SS Rear Panel 100 Capacity
Page | 7