Connecting To The Router - Linksys WRT54G Configuration Note

Connecting to the Router

1 Connect the Router to the same network hub as the workstation you will use to configure it.
This workstation does not necessarily have to be the LucidLink server host computer.
o Connect the Ethernet Cable to the Ethernet connector port.
o Connect the power pack output to the power port.
o Reset to factory default with reset button in back.
3 Open an Internet browser and in the address field enter the default IP address 192.168.1.1.
4 At the login box, enter User Name and Password.
Linksys factory defaults are blank for User Name and admin for Password.
Interlink Networks, Inc.
Linksys WRT54G Router.doc 11/8/2004 2:11 PM
Linksys Wireless G WRT54G
Page 2 of 9