Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ripmax Manuals
  4. Remote Control
  5. Saturn X6
  6. Instruction manual

Ripmax Saturn X6 Instruction Manual

2.4ghz fhss radio system 6 channel
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
2.4GHz FHSS
Radio System
Instruction Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Saturn X6 and is the answer not in the manual?

Questions and answers

Related Manuals for Ripmax Saturn X6

Summary of Contents for Ripmax Saturn X6

  • Page 1 2.4GHz FHSS Radio System Instruction Manual...
  • Page 2 CONTENTS Transmitter Battery Indicators Button Channel Channel Elevator/ Throttle Aileron Trim Stick Throttle/ Elevator Rudder Trim Stick Aileron Rudder Trim Trim On/Off Switch Battery Cover Reversing Switches Remove the battery cover to Mixer Switch replace the transmitter batteries by pressing the marked point Charging and sliding the cover off.

  • Page 3: Transmitter Aerial

    Receiver Aerial Installation To ensure the best range, the receiver aerial should be installed as far away from conductive materials such as metal and carbon. The aerial should be mounted away from any sources of electrical noise such as motors and ESC. The receiver contains precision electronic parts. It is the most delicate on-board radio component and must be protected from vibration, shock and temperature extremes.
  • Page 4 Pairing Procedure Continued Please refer to the text below for the LED status of the receiver’s condition. Receiving signals and the ID is matched: LED On Receiving signals but the ID is not matched/ No Signal Reception: LED Off Receiver ID memory is empty: LED blinks once per second...
  • Page 5 Connection The receiver is typically connected as shown here: AUX 2 / GEAR AUX 1 / GEAR RUDDER THROTTLE / ESC ELEVATOR AILERON If you are not flying electric with a BEC equipped (Battery Eliminator Circuit) electronic speed controller, you can connect a separate 4.8 volt receiver battery to any spare receiver socket.

  • Page 6: Adjustment Procedures

    Adjustment Procedures The servo direction and centre position of each of the four channels can be adjusted. Servo Reversing: Turn on the transmitter and the receiver. Check the direction of operation of each servo. If a servo operates in the wrong direction, it can be reversed without changing the linkage, by simply changing the position of the corresponding servo reversing switch.
  • Page 7 Mixing ELEVATOR RUDDER Channel 2 Channel 4 The Saturn X transmitter has a mixing switch that allows you to select a V-Tail mix - where the elevator and rudder functions are mixed for V-Tail aircraft, or a Delta mix - where the elevator and aileron functions are mixed for flying wings and deltas. Simply connect the servos as show and move the mix switch to the appropriate position.
  • Page 8 Distributed by: Ripmax Ltd., 241 Green Street, Enfield, EN3 7SJ. United Kingdom. Tel: +44 (0)20 8282 7500 Fax: +44 (0)20 8282 7501 U.S. Patent No. 6,983,128 www.ripmax.com Made in China...