Download Print this page

Troubleshooting - Razorri Fresco RFHE800A User Manual

Heating power blender

Advertisement

Solutions
- Pitcher isn't put on the motor unit correctly
LED light is off
- Power cord hadn't plugged in
- Hadn't touch the ON/OFF after choose funtion
LED light is on, but
- No liquid in the jug so overheating
appliance not work
- Alarm during the appliance working
- Power cord had not been plugged in
Panel no respond
- Lid isn't correctly in place
Ingedients can't be
- Add too much or too little water
broken
- Too much or to little ingredients
- Water or ingredients too much or too little
Ingredients
undercooked
- Fuse Protect the appliance
- Pitcher haven't clean completely before
working
Ingredients sticks
to the bottom
- Add too much food
- Having choose corresponding function
- Product is in break-in period
Peculiar smell
- Overload ingredients
- Product is in break-in period
Abnormal whistle
Malfunction
Code
display E1
- he temperature sensor short-circuit
display E2
- Lid or pitcher isn't correctly in place
display E3
- The temperature is too high
display E4
- The temperature is too low
display E5
- The temperature sensor open-circuit
Toubleshooting
Causes
Description
09
Problems
- Re-put the jug on the motor unit
- Check the power cord
- After choose the function, touch "ON/OFF" again
- Add water to the corresponding water level
- Unplugged the power, then repower and
operate according to the manual
- Check the power cord ensure it had been
plugged in
- Re-lock the lid correctly in place
- Add water to the correct level
- Put the ingredients correctly
- Choose the corresponding function
- Put the ingredients correctly
- Stop half an hour or contact After-sale service
department
- Clean the jug completely befor next time use
the appliance
- Put the ingredients correctly
- Choose the corresponding function
- Ventilate and eliminate naturally
- Reduce the ingredients
- It's normal that whistle occasionally
Solution
- Contact support@razorri.com
- Relock the lid on the pitcher or remove and
re-seat the pitcher on the motor unit in place.
- Clean the pitcher, power off and re-working
after half an hour, if still unresolved, contact
support@razorri.com
- Contact support@razorri.com

Advertisement

loading