Advertisement
REAR WALL PANEL
"D" - Wall Corner Panel
Ensure that the small lip
of the channel is to the
outside of the shed.
Large Rib
1
Lay the wall panels out with the large rib
overlapping the small.
Notched ends are orientated to the
both edges of the rear panel
2
Required to manipulate sheeting panel to align the channel holes
130
Overlap top and bottom channel by 130mm. Fit the top and bottom
Outside
channel to the wall panels. Ensure the holes in the channels are inline with
holes in the rib of the sheeting. Make sure the small flange on the channel
positioned outside face of the sheeting.
Small Rib
15
m
m
130
Screw the wall panels in the centre
of the rib as shown.
Notched ends are orientated to the inside of the shed
m
m
PAGE 15
Advertisement
