English | 9 - Bosch SDS-clic Original Instructions Manual

OBJ_BUCH-1537-003.book Page 9 Friday, June 24, 2016 9:11 AM
Quick-clamping Nut
 Observe the safety warnings for the power tool you are using.
 Use the quick-clamping nut 1 603 340 031 only for bonded
grinding and cutting discs and for diamond cutting discs on an
angle grinder with M14 grinder spindle thread –
see figure A2.
 Use the quick-clamping nut 2 608 000 638 for bonded grind-
ing and cutting discs, for diamond cutting discs and also for
carbide cup wheels only on a Bosch angle grinder with magnet-
ic brake function with M14x1.5 grinder spindle thread –
see figure A2.
 Use only a flawless, undamaged quick-clamping nut 3.
Clean the grinder spindle 5, the mounting flange 4 and the quick-
clamping nut 3.
When screwing on, pay attention that the labelled side of the quick-
clamping nut 3 does not face toward the grinding disc; the arrow must
point toward the index mark 2 – see figure A1.
Bosch Power Tools

English | 9

1 609 92A 38B | (24.6.16)