Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Jammin Manuals
  4. Motorized Toy Car
  5. SCRT10
  6. Instruction manual

Jammin Nitro RTR SCRT10 Instruction Manual

1/10th scale short course truck
Hide thumbs Also See for Nitro RTR SCRT10:

Advertisement

Quick Links

Download this manual

Advertisement

loading

Related Manuals for Jammin Nitro RTR SCRT10

Summary of Contents for Jammin Nitro RTR SCRT10

  • Page 2: Important-Read This Before Running

    IMPORTANT-READ THIS BEFORE RUNNING 1.Before Starting •Please read manual carefulyl (With a parent, guardian or a responsible adult if necessary). 2.While Operating •Any running area you choose must be dry. Do not run vehicle near any water or wet areas. •Do not run on public streets.
  • Page 3 OVERVIEW Components Radio Control Car Transmitter Receiver Servo Parts Bag Included Items TOOLS NOT INCLUDED IN THE KIT Screw Cement 1.5mm Allen Wrench Screw Cement Instant Cemment 10289 - THREAD LOCK 10239 - CA 2mm Allen Wrench Body Reamer 10803 - BLACK 10804 - BLUE 10805 - PURPLE GEAR...

  • Page 5: Specification Data

    HNT-3 2.4GHz RADIO SYSTEM OVERVIEW HNT-3 Transmitter 1.Transmitter Antenna *Carefully read the instruction manual of your 2.Servo Reverse Switches radio controller before using and keep it in a safe place as a reference introduction in the future. 3.TX RF Module And Binding Button 4.Power LED 5.Power Switch 6.Steering Dual Rate Trim LED...
  • Page 6 CAUTION • To use your Radio with your models correctly and safely, read this manual carefully and keep it in a safe place for future reference. Warning: 1. This product is only equipped for radio controlled cars; 2. The usage of this product should be approved by local law or regulations; 3.
  • Page 7 AUX Channel Function (CH3) •This switch control the transmitter’s third channel. A servo plugged in this Channel 3 will move to full travel in one direction when the switch is in the “AUX” position, then move the switch to the “OFF” position the servo will move in the opposite position .
  • Page 8 CHECKING YOUR DUAL RATE •To Check Your Dual Rate: 1. Turn your radio “ON” then turn “ON” your vehicle. 2. Check your steering on your radio by turning left and right several times. 3. Now turn your steering wheel all the way to the left or right whichever you choose and hold it while pushing the “DEC”...

  • Page 9: Steering Trim

    Steering Trim Please turn on your transmitter, plug in your battery and turn on your esc while making the adjustment of these settings. 1.Connect the receivers, servos, and other components and then turn on the power switches of the transmitter and receiver. 2.Be sure the steering trim and throttle trim on the transmitter are at their neutral position.
  • Page 10 Throttle Trim •Throttle neutral adjustments can be made by moving the throttle trim to the left or the right. •Racers Tip When using a electronic speed control, please set the throttle trim to neutral and make adjustments to the speed control. On a gas powered model, set the trim to the point where carburetor is fully closed in accordance with the engine instruction manual.
  • Page 11 Handling Procedure For Batteries Handling Procedure For Batteries NOTICE THE DIRECTION OF BATTERY COVER •Battery Replacement 1) Remove the battery cover from the transmitter by sliding it in the direction of the arrow. 2) Remove the used batteries. 3) Load the new 8 AA size alkaline, or Nickel Metal Hydride (NimH) rechargeable batteries, and pay very close attention to the polarity marking on the batteries.
  • Page 12 PLASTIC PARTS FOR USE 37100 40921 SHOCK ABSORBER BUMPER & RADIO TRAY POST & BODY POST 40839 40836 FRONT C HUB FRONT & REAR LOWER ARM 40835 40840 DIFF. CASE FRONT & REAR GEAR BOX 40837 FRONT UPPER ARM & ARM HOLDER...
  • Page 13 PLASTIC PARTS FOR USE 40944 40943 REAR BUMPER FRONT BUMPER 37381 BALL END (4mm) 40541 40945 REAR BUMPER BRACE RECEIVER BOX...
  • Page 14 PLASTIC PARTS FOR USE 40947 40834 BODY POST & CENTER BRACE SERVO SAVER 40802 40841 40844 FRONT KNUCKLEARM STEEL SPUR GEAR (46T) CENTER DIFF. MOUNT 40843 REAR UPRIGHT 40848 STABILIZER BALL END SYMBOL USED THROUGHOUT THE INSTRUCTION MANUAL Ensure Degrease With Ensure Free Do Not Free...
  • Page 15 ASSEMBLY OF THE FRONT AND REAR DIFF. *Build two differentials for front and rear. Step 1 Step 2 4x4 mm 30780 2x12.8mm Pin ..x4 30780 94034 4x4mm ..x2 40808 Set Screw 40808 37450 30780 40009 P6 O-Ring ..x4 37450 40803 40009 40835 40009...
  • Page 16 ASSEMBLY OF THE CENTER DIFF. 2.6x10mm Tighten Step 1 Step 2 30776 40805 30773 Tighten the diff screws in this order. 30776 4x10mm Washer ..x8 40011 94046 2.6x10mm ..x4 Flat Head Screw •Apply silicone oil to the differential gear during assembly. CENTER 30773 10233 - 5000WT...
  • Page 17 ASSEMBLY OF THE FRONT LOWER ARMS •A 3x8mm set screw is used to adjust ride-height. 94035 Ensure 3x8mm ..x2 Free 3x8mm Set Screw 40836 Movement 40837 94004 3x12mm ..x2 Hex Screw 40825 3x53mm Arm Shaft ..x2 40825 Ensure 40837 Free •...
  • Page 18 ASSEMBLY OF THE FRONT SUSPENSION ARMS Assemble both right and left sides. •Insert drive shaft into cap joint before assembly. Ensure Free 94001 Movement 3x4mm ..x2 Hex Screw 94005 3x16mm ..x2 Hex Screw 3x4mm 40823 3x25.8mm Arm Shaft ..x2 40823 3x16mm ASSEMBLY OF THE FRONT STABILIZER Assemble both right and left sides.
  • Page 19 ASSEMBLY OF THE SERVO SAVER 40810 Ensure Free Step 1 Step 2 Step 3 Movement 40922 40834 40834 40834 37360 37360 Servo saver spring preload. 37220 •Approx. 0.5mm 37220 37220 King Pin Bushing ..x2 3x8mm 37360 40809 3x8mm Do Not 94002 Over Tighten 3x8mm...
  • Page 20 ASSEMBLY OF THE FRONT BODY POST Assemble both right and left sides. Step 1 Step 2 40947 2.6x15mm 40947 94004 3x12mm ..x4 40947 Hex Screw 3x12mm 94005 40947 3x16mm ..x2 3x16mm 3x12mm Hex Screw 94054 2.6x15mm ..x2 Screw ASSEMBLY OF THE FRONT BODY STAY ONTO FRONT GEAR CASE 94041 ..x2 3x16mm...
  • Page 21 ASSEMBLY OF THE FRONT BUMPER 40943 94004 3x12mm 3x12mm ..x2 Hex Screw ASSEMBLY OF THE REAR GEAR CASE 4x4mm 3x10mm Step 1 Step 2 40921 40840 40806 37430 5x11mm Ball Bearing ..x2 37430 38254 3x10mm 37430 38254 12x15x0.25mm Shim ..x2 40804 94003 40840...
  • Page 22 ASSEMBLY OF THE REAR CENTER BRACE 3x15mm 40947 40947 94003 40947 3x10mm ..x1 3x10mm Hex Screw 94005 3x16mm ..x1 Hex Screw ASSEMBLY OF THE REAR LOWER ARMS •A 3x8mm set screw is used to adjust ride-height. 94035 3x8mm ..x2 Set Screw Ensure Free 3x8mm...
  • Page 23 ASSEMBLY OF THE REAR SUSPENSION ARMS Assemble both right and left sides. 3x12mm 37100 40828 (3x60mm) 30403 30403 37100 6mm Ball ..x4 30403 94004 3x12mm ..x2 Hex Screw 94005 3x16mm ..x2 Hex Screw •Approx. 47mm 3x16mm ASSEMBLY OF THE REAR STABILIZER Assemble both right and left sides.
  • Page 24 ASSEMBLY OF THE REAR BODY POST Assemble both right and left sides. Step 1 Step 2 40947 2.6x15mm 40947 94004 3x12mm ..x4 Hex Screw 40947 3x12mm 94005 40947 3x16mm ..x2 3x16mm Hex Screw 3x12mm 94054 2.6x15mm ..x2 Screw ASSEMBLY OF THE REAR BODY STAY ONTO REAR GEAR CASE Step 1 Step 2 94041...
  • Page 25 ASSEMBLY OF THE REAR BUMPER 40945 3x16mm 94005 3x16mm ..x2 Hex Screw ASSEMBLY OF THE REAR BUMPER Assemble both right and left sides. 3x18mm 40944 94006 3x18mm ..x2 Hex Hex Screw ASSEMBLY OF THE REAR BUMPER 40944 3x10mm 94003 3x10mm ..x6 Hex Hex Screw...
  • Page 26 ASSEMBLY OF THE CENTER DIFF. MOUNT 3x10mm Step 1 Step 2 Step 3 40844 40830 3x3mm 40844 30171 40844 40844 40830 •Approx. 12mm 94033 3x3mm ..x1 Set Screw 40844 94003 3x10mm ..x4 Hex Screw ASSEMBLY OF THE BRAKE DISK INTO CENTER DIFF. Step 1 Step 2 3x12mm...
  • Page 27 ASSEMBLY OF THE FRONT GEAR CASE ONTO CHASSIS 3x10mm 94019 3x10mm ..x10 Flat Head Hex Screw ASSEMBLY OF THE REAR GEAR CASE ONTO CHASSIS 94019 3x10mm ..x4 Flat Head Hex Screw 40943 94021 3x15mm 3x15mm ..x4 3x10mm Flat Head Hex Screw ASSEMBLY OF THE CENTER DIFF.
  • Page 28 ASSEMBLY OF THE FRONT STEERING SERVO STEERING SERVO 34026 3x8mm 34026 3x16mm 94040 ..x4 3x8mm Washer 94005 3x16mm ..x4 Hex Screw ASSEMBLY OF THE STEERING TIE-ROD Step 1 Step 2 30400 (3x46mm) 37381 37360 37381 40967 Approx. 31.9mm Use the screw provided with your servo .
  • Page 29 ASSEMBLY OF THE RADIO TRAY AND RECEIVER BOX 40541 30560 Step 1 Step 2 3x10mm 40642 37410 •Use the original battery case or rechargeable hump pack battery. •Connect battery wire to switch. 40541 Battery Case •Put the servo wire into receiver box and connect to receiver.
  • Page 30 ASSEMBLY OF THE CLUTCH Step 1 Step 2 •Only use the 10091 pilot shaft for threaded crank shaft engine. 10091 Pilot Shaft (Not Included) Threaded Crank Shaft 38430 40814 10009 •Fit the flywheel using a pair of the 38430 40814 plIer and cross wrench.
  • Page 31 ASSEMBLY OF THE MANIFOLD AND MUFFLER Step 2 94034 4x4mm ..x1 Set Screw 40917 Step 1 94036 5x4mm ..x1 Set Screw 95901 Zip tie 94018 3x5mm ..x1 10120 Flat Head Hex Screw 5x4mm 4x4mm 38397 40832 40970 40968 3x5mm ASSEMBLY OF THE THROTTLE LINKAGE Step 1 Step 2 30800...
  • Page 32 ADJUSTING THE ENGINE CONTROL LINKAGES (Neutral) (Throttle High) (Brake) Approx. 0.5mm 10300 10300 Idling adjusting Screw 36140 Approx. 1mm gap Carburetor is Open fully •Turn on the Transmitter then Receiver and set the •Adjust the Servo-Horn mounting position for the •Adjust 10300 so the brakes work smoothly.
  • Page 33 ASSEMBLY OF THE FRONT SHOCKS CORRECT SHOCK ASSEMBLY *Assemble 2 sets for front. Step 1 Step 2 •Carefully screw the shock shaft into the bottom of the plastic 37100 ball until the distance between the ball end 37070 and the shock body P3 O-Ring ..x4 is 18mm for the front.
  • Page 34 ASSEMBLY OF THE FRONT SHOCK ABSORBER 94041 ..x2 Nylon Nut 3x18mm 94006 3x18mm ..x2 Assemble both right and left sides. Hex Screw ASSEMBLY OF THE REAR SHOCK ABSORBER 94041 ..x2 Nylon Nut 3x18mm 94006 3x18mm ..x2 Assemble both right and left sides. Hex Screw ASSEMBLY OF THE TIRES AND WHEELS *Make four tires that are the same.
  • Page 35 ASSEMBLY OF THE WHEEL BEAD LOCKS •Assemble bead locks on all four tires. 2x6mm 40940 94057 2x6mm Screw ..x44 ASSEMBLY OF THE TIRE ONTO FRONT KNUCKLE AND REAR HUB ASSEMBLY OF THE FUEL TUBE 10177 10177 ssembled t ire and wheel. 40865 40865 4mm Nylon Nut...

  • Page 36: Setting Guide

    SETTING GUIDE FRONT CAMBER ANGLE SETTING REAR CAMBER ANGLE SETTING Positive Negative Positive Negative Turnbuckle Turnbuckle •Place the model car on flat surface. Raise the chassis to its maximum clearance before the wheels leave the ground. •Adjust the length of the front and rear upper arms so that the wheels are vertical to the ground.
  • Page 37 SCRT10 Set-Up Sheet Date:________________ Driver:_________________ Track:_______________/_______ Air Temp:_____80F_____ Surface Dsc. ______WATERED & DRY_______ Avg. Lap Time:_______"______ Front Suspension Front Roll Center Steering Ackerman Location Shock Spring: _______Gray______ Shock Piston: Shock Oil wt: ________ Shock Length:________ (Center to Center) Toe-IN: _________ Front Sway Bar Preload Toe-Out: ________ Front Ride Height: _____________...
  • Page 39 SCRT10 Set-Up Sheet Date:________________ Driver:_________________ Track:_______________/_______ Air Temp:_____80F_____ Surface Dsc. ______WATERED & DRY_______ Avg. Lap Time:_______"______ Front Suspension Front Roll Center Steering Ackerman Location Shock Spring: _______Gray______ Shock Piston: Shock Oil wt: ________ Shock Length:________ (Center to Center) Toe-IN: _________ Front Sway Bar Preload Toe-Out: ________ Front Ride Height: _____________...

  • Page 41: Warranty Period

    Warranty Period OFNA warranties that the Products purchased (the “Products”) will be free from defects in materials and workmanship at the date of purchase by the Purchaser. Limited Warranty (1) This warranty is limited to the original Purchaser (”Purchaser”) and is not transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER.
  • Page 43 TO: OFNA TECHNICAL SUPPORT 7 VANDERBILT, IRVINE, CA 92618 TODAY’S DATE: month________day______ 1. Print out form. 2. Fill out the form completely. 3. Make a copy of purchase receipt. All replacements/repairs will not be processed, unless accompanied by proof that item(s) was purchased. 4.

  • Page 45: Owner's Registration Card

    OWNER’S REGISTRATION CARD OFNA Racing congratulates you on your purchase of our fine OFNA Product. With proper maintenance and han- dling this kit will provide many hours of enjoyment. The registration card should be filled out and mailed to OFNA Racing within 10 days of purchase date. In the event that the kit is incomplete or component parts are broken due to error in manufacturer, contact your dealer from which you purchased the kit for replacement part or call OFNA at (949) 586-2910 for your nearest dealer location.