Lumag BT900 Operator's Manual
Petrol power float
Hide thumbs
Also See for BT900:
- Operator's manual (56 pages) ,
- Original operating instructions (52 pages)
Related Manuals for Lumag BT900
Summary of Contents for Lumag BT900
- Page 1 Distribution Limited Petrol Power Float Operator’s Manual BT900 FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE...
- Page 3 PLEASE BE SURE TO READ THIS MANUAL BEFORE STARTING YOUR OPERATION. Special Warning Please be sure to check the level of oil, as following: 1.The level of oil in engine, please be sure the level of oil is the range within the oil ruler scale. The engine would be shattered if the oil level is too low or without oil.
- Page 4 Foreword It would be appreciated if you have bought our products. The instruction is inform you how to use exactly and maintain the machines. Please be sure to read and know well related technology so that the machine can work in the good condition and extend the useful life. Please fill the following information before using the machine in order to keep user’s advantage.
- Page 5 Catalog Ⅰ Sketch Map Ⅱ Safety Notice Ⅲ Check before using Ⅳ Turn on Ⅴ Turn off Ⅵ Simple Maintenance Ⅶ Trouble Shooting Ⅰ. Sketch Map...
- Page 6 Ⅱ. Safety Notice Exhaust Notice Can’t breathe in exhaust Lease use the power trowel in the place with aerating all right. Gasoline is flammable Please stop the engine before putting on gasoline. Don’t add the gasoline too full and lean to using the machine No smoking while you are putting on gasoline.
- Page 7 Operator Please the person unauthorized or which is not trained touch the equipment. Please check often the safe switch in order to keep safety. Running Notice As to operation and running components, please be sure to keep all safe equipments running without troubles. Transport Notice Please empty the engine gasoline when the machine are transported for far distance, in case the fuel machine can’t work.
- Page 8 Ⅲ. Check before using Check the engine oil Please put on machine oil first before using. Because the machine oil is drawn out before the products are leeave factory. Check fuel The product must use the normal lead-free gasoline. Check the gear oil Please put on gear oil before using.
- Page 9 Ⅳ. Turn on 1. Open the flameout switch of engine to “ON” 2.Open safe switch to “ON” 3.Open fuel switch 4.Close block wind door 5.Put the oil door switch in 6.One hand buttress handle, middle position another hand draw the engine...
- Page 10 7.Warm up engine for three to five 8.Adjust blades to proper height 9.Two hands hold the handle, then minutes first, then open block wind door adjust the switch of oil door to proper running speed for operation Ⅴ. Turn off 1.
- Page 11 Ⅵ. Simple Maintenance Engine Section Step: ○ Check and clear the air colander Step: ○ Check and clear the spark plug Step: ○ Check and change the machine oil...
- Page 12 Pedestal Section Step: ○ Append and change the gear oil Step: ○ Butter blade and under pan in case rust Please maintain the machine termly refer to the work back-check table...
- Page 13 Work Back-check Table Working Hours (Day / Times) ( Week / Times) ( Month / Times )Every Components Every 8 Hours Every 50 Hours 200 Hours A. Engine 1. Machine Oil Check Change Oil 2. Spark plug Check 3. Air Colander Cleanout B.
- Page 14 Add a little engine oil Machine movement Point Ⅶ. Trouble Shooting Ensure the reason of Troubles The Way of Trouble Shooting The engine can’t be turned on 1. Flameout Switch of Engine 2. Safety Switch of Handle 3. Block Wind Door Switch of Engine Open 4.
- Page 15 Ensure the reason of Troubles The Way of Trouble Shooting The engine can’t be turned on 15. Test Oil Route(Enclose Picture B) Drop Fuel Lock Fixation Button Drop fuel and Water Clean up the Oil container and Wasting Gasoline Machine Don’t drop fuel Professional person deal with the Wasting Gasoline Machine or Contact us...
- Page 16 Ensure the reason of Troubles The Way of Trouble Shooting The engine can’t be turned on Drive is Good (Enclose Picture D) 1. The Strap is abraded Change 2. Strap wheel is abraded Change 3. Strap wheel is improper position Adjust and fix up 4.
- Page 17 have any further question. Services phone( 24 hours every day ):...
Need help?
Do you have a question about the BT900 and is the answer not in the manual?
Questions and answers