Table of Contents
Advertisement
Safety
Read and understand this Operator's Manual before using
the backpack blower. Be thoroughly familiar with the
proper use of the backpack blower.
Never allow children to operate the backpack blower. It is
not a toy. Never allow adults to operate the unit without
first reading the Operator's Manual.
Become familiar with the controls and know how to stop
the engine quickly.
Always use eye protection and ear protection.
Keep the area of operation clear of all persons,
particularly small children, and pets.
Do not point blower nozzle in the direction of people or
pets.
Never operate the backpack blower when you are
fatigued.
Never operate the backpack blower without proper guards
or other protective safety devices in place.
Dress properly; do not wear loose clothing or jewelry that
can be caught in moving parts. Always wear substantial
footwear, long pants, and a long-sleeved shirt.
Gasoline is highly flammable; handle it carefully.
Do not smoke while handling gasoline.
Use an approved fuel container for storing the
gasoline/oil mixture.
Do not fill the fuel tank when the engine is hot or
running.
Fill the fuel tank outdoors and only up to one-half inch
from the top of the tank. Do not fill the filler neck.
Wipe away any spilled gasoline before starting the
engine.
Always be sure of your footing; keep a firm hold of the
blower pipes, and walk, never run, while operating the
backpack blower.
Use the correct accessories. Do not use the backpack
blower for any job except that for which it is intended.
Keep all fasteners tight and be sure the backpack blower is
in safe working condition. Follow the maintenance
instructions in this manual.
Do not put hands or feet near or under the rotating parts.
Keep clear at all times.
If the backpack blower should start to vibrate abnormally,
stop the engine immediately and check for the cause.
Vibration is generally a warning of trouble.
Avoid using the backpack blower near rocks, gravel,
stones, and similar matter to avoid dangerous flying
debris. Use the backpack blower only in daylight or good
artificial light.
Do not allow bystanders in work area.
Do not operate without guard(s) in place.
Do not operate in unventilated area.
Assembly
1. Locate and identify all the components (Fig. 1)
1
4
6
1. Flexible pipe
2. Swivel pipe
3. Straight pipe (x 2)
4. Band – 3.0 in
2. Using the bands, connect the flexible pipe to the
blower, and the swivel pipe to the flexible pipe
(Fig. 2).
3. Assemble the straight pipe and bent pipe. Then
connect them to the swivel pipe (Fig. 2).
3
2
3
5
7
8
M–3867
Figure 1
5. Band – 4.25 in
6. Bent pipe
7. Operator's manual
8. Warranty registration card
Advertisement
Table of Contents
