Replacing The Light Bulbs; Replacing The Rear-Facing Bulbs; Replacing The Side-Facing Bulbs - Toro MMX-1158H-S Operator's Manual

Replacing the Light
Bulbs
Replacing the Rear-facing
Bulbs
Note: The left rear-facing bulb also illuminates license plate.
1. Use a screwdriver to remove the 4 screws from the
large square lens on the light (Figure 62).
A B
D E
Figure 62
2. Remove the lens (Figure 62).
3. Push and twist the bulb counterclockwise to remove it
from the socket (Figure 62).
4. Push a new 1157 bulb into the socket and then twist it
clockwise (Figure 62).
5. Install the lens and the 4 screws (Figure 62).
Replacing the Side-facing
Bulbs
1. Use a screwdriver to remove the 2 screws from the
small rectangular lens on the side of the light (Figure
63).
A B
D E
Figure 63
C
F
G020829
C
F
G020830
37
2. Remove the lens (Figure 63).
3. Pull the bulb out of the socket (Figure 63).
4. Push a new 168 bulb into the socket (Figure 63).
5. Install the lens and the 2 screws (Figure 63).