Yamaha Disklavier MX-100A Service Manual page 12

• SYSTEM INFORMATION
1) SYSTEM REALTIME MESSAGES
Note 3: When the preferred data, including active sensing, has been transmitted, if data
is not transmitted within an interval of approximately 80 milli seconds, the main
clock is transmitted.
* The system realtime messages Timing Clock, Start, Continue, and Stop can be transmitted
only when the metronome function is ON.
* When playing back a disk recorded on another system (E-seq), all system information as
well as system exclusive messages can be transmitted.
* In MIDI OUT = DELAY OUT conditions, and also in Stop or Recording mode, delay the data
received through MIDI IN by 500msec, and merge it with MIDI OUT without any changes.
9