Plustek NVR X840P User Manual page 29

available IP Camera with its "Device Name", "IP Address" and "Port".
4. Click on the page icon to select a desired IP Camera. Click the "Select" button and
the selected camera's information will be displayed in the following columns.
5. Set the "Device Name" for the IP Camera. The "Name" is of more importance as it
will be used throughout the menus and the user interface of the NVR Viewer.
Enter the IP Camera's "User Name" and "Password". Enter the password again in
"Confirm Password". Activate the "Enable default motion recording" checkbox if
desired.
6. Click the "Add" button to add the IP Camera to the channel list. The IP Camera's
connection, recording and alarm status will be shown.
25