Safety Instructions - Carver TX-11b Manual

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Safety Instructions
1 Read Instructions - All the safety and operating
instructions should be read before the com-
ponent is operated.
2 Retain Instructions - The safety and operating
instructions should be retained for future
reference.
3 Heed Warnings - All warnings on the com-
ponent and in the operating instructions should
be adhered to.
4 Follow Instructions - All operating and other in-
structions should be followed.
5 Water and Moisture - The component should
not be used near water - for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool,
etc.
6 Ventilation - The component should be situated
so that its location or position does not interfere
with proper ventilation. For example, the com-
ponent should not be situated on a bed, sofa,
rug, or similar surface that may block the ven-
tilation openings; or placed in a built-in installa-
tion such as a bookcase or cabinet that may
impede the flow of air through the ventilation
openings.
7 Heat - The component should be situated away
from heat sources such as radiators, or other
devices that produce heat.
8 Power Sources - The component should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the component.
9 Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user of the presence of uninsulated "danger-
ous voltage" within the product's enclosure; that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user of the
presence of important operating and mainten-
ance (servicing) instructions in the literature
accompanying the appliance.
or against them, paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the component.
10 Cleaning - The component should be cleaned
only as recommended in this manual.
11 Non-use Periods - The power cord of the com-
ponent should be unplugged from the outlet
when left unused for a long period of time.
12 Object and Liquid Entry - Care should be taken
so that objects do not fall into and liquids not
spilled into the inside of the component.
13 Damage Requiring Service - The component
should be serviced by qualified service person-
nel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been
spilled into the component; or
C. The component has been exposed to rain; or
D. The component does not appear to operate
normally or exhibits a marked change in per-
formance; or
E. The component has been dropped, or the
cabinet damaged.
14 Servicing - The user should not attempt to ser-
vice the component beyond those means
described in the operating instructions. All
other servicing should be referred to qualified
service personnel.
15 Power lines - An outdoor antenna should be lo-
cated away from power lines.
16 To prevent electric shock do not use this
(polarized) plug with an extension cord, recep-
tacle or other outlet unless the blades can be
fully inserted to prevent blade exposure.