Carver C-1000A Owner's Manual page 10

------------------------------------O\RVER---
15. Bass
Rotate this control clockwise to increase
the bass level, and counter-clockwise to
decrease it. The dB level will appear in the
display; at OdB, there is no bass cut or boost.
16. Treble
Rotate this control clockwise to increase
the treble level, and counter-clockwise to
decrease it. The dB level will appear in the
display; at OdB, there is no treble cut or
boost.
17. Balance
Rotate this control clockwise to increase
the level of the right speaker, and rotate it
counter-clockwise to increase the level of the
left speaker. The dB level will appear in the
display; at OdB, both speakers play at the
same level. This control is useful if you are
sitting closer to one speaker than the other,
you can adjust them to play at the same
level.
18. Tuner Controls
MEMORY stores the currently tuned station
into preset memory.
DIRECT is used to enter a station's frequency
directly using the 0 - 9 keys.
FM NOISE REDUCTION is used to reduce FM
noise and will help lock on to weaker sta-
tions.
AM/FM selects between the AM or FM band.
UP/DOWN is used to switch to stations above
or below the frequency of the current station.
If repeatedly pressed, the tuner will move up
or down one frequency step each time. If held
down for a second or more, the tuner will
automatically tune to the nearest station.
19. Level
This control adjusts the volume of all the
speakers in your system at the same time,
and the C-l OOOA's display will show the level.
Make sure that the level is low when first
turning on your system.
The OdB indicator is an aesthetic en-
hancement only, and is on all the time.
20. Station Select
Tuner Presets:
• If you enter a number which has been
previously memorized as a radio station's
preset, the C-l OOOA will automatically
select the internal tuner, and tune to that
station.
• The buttons can be used in a number of
ways to operate the tuner: save a station
as a preset number, recall a preset sta-
tion, and directly enter a station's fre-
quency. These details are explained on
page 27
On-screen Display:
• If you press the ON-SCREEN button, you
can use the keypad to navigate through
the menu on your 1V screen, in a similar
way to using the remote control.
II
5 is used as the ENTER
0/
button, to enter the differ-
.. entmenus.
II II
2 and 8 are used to move
0~4
05
~06
up and down the menus.
ENTER
4 and 6 are used to select
II
.... different options inside
08
each menu.
21. Display
The display shows many useful features
such as: input selection, surround mode, dB
level, and radio station frequency. It makes it
easier to make adjustments and operate the
C-IOOOA, as the adjustment levels and
status can be seen.
22. Remote Window
This window should be clean and free from
obstruction for the remote control to work
correctly.
23. Indicators
The SONIC HOLOGRAPHY LED will light if
this circuit is engaged. The other three LEDs
indicate key features of the C-l OOOA and are
on all the time.
O\RVER
F_r_o_n_t_p_an_e_l_F_e_a_t_u_re_s __
~