Subscribe to Our Youtube Channel
Related Manuals for Focus BATHYSCAFOCUS Hublot
Summary of Contents for Focus BATHYSCAFOCUS Hublot
-
Page 1: Table Of Contents
BATHYSCAFOCUS HUBLOT: INSTALLATION AND USER MANUAL 1. TECHNICAL DATA 2. PRE-INSTALLATION 3. INSTALLATION 4. OPERATION 5. TESTING Keep for future use OBLICA 200 Argyle St Fitzroy VIC 3065 03 9416 0400... -
Page 2: Technical Data
Standard bracket weight 20Kg External flue kit Triple skin 200/250/300mm DETERMINED UNDER TEST CONDITIONS: Nominal thermal output 16.5kW Efficiency 55.8% Emissions (Australian Test) 1.2 g/Kg FLUE ø219 mm FIREBOX ø700 mm OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 2... -
Page 3: Pre-Installation
2. PRE-INSTALLATION Congratulations on your purchase of the BathyscaFocus Hublot. This appliance should be installed and checked by a qualified professional. Ensure you have read the operation guidelines thoroughly prior to first use. For any questions or concerns please contact Oblica on 03 9416 0400. - Page 4 2.2 Clearance from glass 750mm minimum clearance is required if the rotation of 500mm minimum clearance is required from normal the BathyscaFocus Hublot is locked at 120˚ or 90˚ away non-combustible glass. from the wall. Locking the BathyscaFocus Hublot so that 350mm minimum clearance is required from the opening is fixed is an option available on purchase.
-
Page 5: Installation
200 X 250 X 300 (8’ x 10’ x 12’) RUBBER FLASHING Insulative pad CROSS BAR SET IN-BETWEEN RAFTERS ( Plaster Ceiling Minimum Gap) CEILING FLANGE SUSPENSION BRACKET CONNECTOR LOWER FLUE 219mm dia. OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 5... - Page 6 3. INSTALLATION (CONTINUED) PITCHED ROOF INSTALLATION (CUSTOM MADE BRACKET) OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 6...
- Page 7 The top of the flue must be 1200mm above the roofline. Alternatively, there must be a minimum distance of 3 meters from any higher section of roof. > 3 m – > 120 cm – > 120 cm > 120 cm – – OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 7...
- Page 8 3.3 Installing the internal flue Position the single skin flue inside the suspension bracket and tighten the grab screws. Ensure that the flue is perfectly vertical and the grab screws are tight. Grab Screw OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 8...
- Page 9 3. INSTALLATION (CONTINUED) OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 9...
- Page 10 3. INSTALLATION (CONTINUED) OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 10...
- Page 11 Combustible Insulative board (6mm) floor (eg. timber) + non combustible finish Joist FLOOR PROTECTOR LAID ON JOIST 300mm Combustible Insulative board (6mm) floor (eg. timber) + non combustible finish Joist OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 11...
- Page 12 (CONTINUED) FLOOR PROTECTOR LAID ON CONCRETE 300mm Combustible Non combustible finish floor (eg. timber) (eg.tiles) Concrete TOP VIEW 300mm FIREBOX Floor protector / non combustible finish Combustible floor (eg. timber) OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 12...
-
Page 13: Operation
• Misuse may lead to unhealthy and environmentally harmful emissions and will void any warranty or guarantee. • The maximum load capacity for the Bathyscafocus Hublot is 20kg of wood. • Burning only seasoned hardwood helps to protect the environment and lower emissions. -
Page 14: Testing
The maximum average heat output was 17.8Kw and the overall average efficiency was 55.8% when tested in accordance with AS/NZS4013:1999. CONCLUSION: This appliance does comply with the requirements of AS/NZS 4013:1999 for the configuration tested. OBLICA | BATHYSCAFOCUS HUBLOT INSTALLATION AND USER MANUAL PAGE 14...
Need help?
Do you have a question about the BATHYSCAFOCUS Hublot and is the answer not in the manual?
Questions and answers