Connecting A Network Cable (Wired Connection) - Yamaha MusicCast RX-V4A User Manual

PREPARATIONS > Preparing for connecting to a network

Connecting a network cable (wired connection)

Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight
cable).
When using a router that supports DHCP, you do not need to configure any network settings for the unit.
Internet
Modem
HDMI OUT
eARC/ARC
AUDIO 1 AUDIO 2
(3 MUSIC)
OPTICAL COAXIAL
NOTE
You need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters
manually.
Related links
"Setting the network parameters manually" (p.215)
(
"Checking the network information of the unit" (p.212)
(
WAN
LAN
Wireless router
Network cable
HDMI
1 2 3 4
(1 MOVIE)
AUDIO 3 AUDIO 4 AUDIO 5
Network Attached Storage
(NAS)
PC
NETWORK
(4 NET RADIO)
PRE OUT
ANTENNA
SUBWOOFER
AM ( 2 RADIO ) FM
1
75
2
The unit (rear)
62