Seg SB 1200 Instruction Manual page 65

Disable or enable West limit or East limit
Store Position
Automatic Satellites Search
Save the current position you
searched.
Go to Position
Press OK button to move the
dish to the stored position.
Go to Reference
Press OK button to move the
dish to 0 position.
Press EXIT after setup, and you can search channel now.
Automatic Satellites Search
Select one satellite, and press OK to mark. You can select more
satellites at one time, but make sure they are all configured to your
DiSEqC Switch. Then choose Scan All Channel, Scan Free Channel and
Blind Scan to start the channel
Channels and Radio Channels
will pop up automatically on
the screen in two separate
lists.
Manual TP Search
Press OK button to enter the
Manual TP Search Menu, here
you have to set up all data
searching. During the searching, TV
17