Advertisement
Fig.5
Fig.6
3.8.8 Attach a locking block (O) to the right hand side of each drawer in
the orientation shown in fig.5 using two self tapping screws (Ø9mm).
There are two moulded pins on the back of the moulding which
align with pre-drilled holes in the side of each drawer.
3.9
INSERT DRAWERS INTO THE CABINET.
3.9.1 Insert the drawers into the cabinet as follows. Where a drawer is
to be inserted pull the cabinet runners fully out.
3.9.2 Get a second person to help you. Support the drawer at either
side and hold it so that the drawer runners are within the cabinet
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
3.9.3 Slide the drawer fully into the cabinet. If the drawer is lop sided
3.9.4 To remove a drawer, slide the draw out fully until it stops. Where
3.10
3.10.1 To lock the cabinet, insert the key and turn it fully clockwise. Test
3.10.2 When the cabinet is unlocked the safety mechanism ensures
3.10.3 Move the cabinet to its final location before filling it with files.
Fig.8
Fig.7
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
runners. Slide each silver ball bearing carrier out to the end of
each cabinet runner until it connects with the drawer runner by at
least 50mm on each side.
and the front is miss-aligned with the cabinet then one or both of
the runners are not sliding within the ball bearing carrier. If the
drawer front fits properly into the cabinet, slide it out again to
check that it has locked in place. It will automatically stop at the
maximum permitted extension.
the drawer runner protrudes from the cabinet runner a small
black lever can be seen within the runner. See inset fig.8. Push
the left hand lever down and hold it down. Pull the right hand
lever up and keep it there. When the drawer is pulled further out
the drawer runners will release from the cabinet runners and the
drawer can be removed.
CABINET OPERATION.
each drawer to ensure it is locked. To open the cabinet, turn the
key fully anti-clockwise.
that only one drawer can be opened at a time to prevent the
cabinet from toppling when fully loaded. Test the mechanism by
opening one drawer. Whilst the drawer is open it should not be
possible to open other drawers. If another drawer opens check
that the safety block (P) is installed and correctly fixed.
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SFC4 Issue No: 1 - 22/02/10
Advertisement
