Advertisement
made in
USA
The most up to date instructions can be downloaded from the product page at altrider.com, under the instructions tab.
Dear Rider,
Thank you for choosing AltRider!
first time ADV-Newbie, we welcome you to the AltRider experience.
install your new product with the utmost confidence.
and manufactures all of its products here in the United States.
proud to do what we do, and honored to present to you the product of our
labors.
Enjoy it, show it off, and most of all, RIDE IT!
Venture On,
Jeremy LeBreton
AltRider Adapter Bracket Kit
for BMW R1250GS 2019+
Whether a seasoned world adventurer or a
You can
AltRider designs, tests,
We are
AltRider Bracket Adapter Kit
AltRider Crashbar Adapter
BMW R1200 GS Adventure 2014+
Kit BMW R1250 GS 2019+
R114-9-1000
Package Contents:
- Brackets
- Hardware Kit
- Instructions
AltRider LLC
Global
mailing:
4000 Aurora Ave N Ste 100
Seattle, WA 98103 USA
phone:
206-922-3618
email:
info@altrider.com
web:
www.altrider.com
Europe
AltRider
mailing:
AltRider EU
Spectrumlaan 31
Heliumstraat 230
2665 NM Bleiswijk
2718 RS Zoetermeer
Netherlands
The Netherlands
email:
info@altrider.eu
REV 1.0
MADE IN THE USA
Advertisement
Table of Contents
Related Manuals for AltRider R119-9-1001
Summary of Contents for AltRider R119-9-1001
- Page 1 BMW R1250GS 2019+ INSTALLATION INSTRUCTIONS The most up to date instructions can be downloaded from the product page at altrider.com, under the instructions tab. Dear Rider, Thank you for choosing AltRider! Whether a seasoned world adventurer or a first time ADV-Newbie, we welcome you to the AltRider experience.
- Page 2 BMW R1250GS Adapter Bracket Kit Installation Instructions Kit: Left bracket Right bracket (qty 2) clamp (qty 8) M6 washer (qty 2) M6 x 45 socket cap screw (qty 2) M6 x 50 socket cap screw (qty 4) M6 x 16 socket cap screw Required Tools: 5mm hex bit or Allen Key Thread locker...
- Page 3 Rider’s left Next, install each billet block into their respective upper crash bar ange Once AltRider upper crash bars are installed, separate the kit contents using the (2) M6x 16 socket cap screws, (2) M6 washers, and thread locker. to each side. Note the di erence in shape for each side of the billet Tighten to 8Nm peices.
- Page 4 Product. To the extent allowed by law, AltRider shall not be held liable for any direct, indirect, punitive, incidental, special or consequential damages arising out of, or connected with, the use or misuse of this Product.
Need help?
Do you have a question about the R119-9-1001 and is the answer not in the manual?
Questions and answers