Advertisement
Quick Links
made in
USA
The most up to date instructions can be downloaded from the product page at altrider.com, under the instructions tab.
Dear Rider,
Thank you for choosing AltRider!
first time ADV-Newbie, we welcome you to the AltRider experience.
install your new product with the utmost confidence.
and manufactures all of its products here in the United States.
proud to do what we do, and honored to present to you the product of our
labors.
Enjoy it, show it off, and most of all, RIDE IT!
Venture On,
Jeremy LeBreton
AltRider Crash Upper Bars for
BMW R 1200 GSW 2017+
INSTALLATION INSTRUCTIONS
Whether a seasoned world adventurer or a
You can
AltRider designs, tests,
We are
BMW R1200 GSW 2017+
Upper Crash Bars
Package Contents:
- Crash Bars
- Hardware Kit
- Instructions
AltRider LLC
Global
mailing:
4000 Aurora Ave N Ste 100
Seattle, WA 98103 USA
phone:
206-922-3618
email:
info@altrider.com
web:
www.altrider.com
Europe
mailing:
Heliumstraat 230
2718 RS Zoetermeer
The Netherlands
email:
info@altrider.eu
web:
www.altrider.eu
MADE IN THE USA
R117-X-1001-INST REV 2.1
Advertisement
Related Manuals for AltRider R117-X-1001
Summary of Contents for AltRider R117-X-1001
- Page 1 BMW R 1200 GSW 2017+ INSTALLATION INSTRUCTIONS The most up to date instructions can be downloaded from the product page at altrider.com, under the instructions tab. Dear Rider, Thank you for choosing AltRider! Whether a seasoned world adventurer or a first time ADV-Newbie, we welcome you to the AltRider experience.
-
Page 2: Installation Instructions
BMW R 1200 GS Upper Crash Bars Installation Instructions Kit: Upper crash bars (8) M6 washers (8) M6 x 35mm screws (4) M5 x 35mm screws (6) M5 washers Upper bracket (2) aluminum clamps Hand Tools Recommended tools: hardware tray 1/4”... - Page 3 BMW R 1200 GS W Upper Crash Bars Installation Instructions TIP: Using T25 driver remove the (4) screws holding radiator Using T25 driver, remove four (4) screws holding the side panels in place, (two shrouds in place, (2) on each side. fasteners on each side) where indicated.
- Page 4 BMW R 1200 GS W Upper Crash Bars Installation Instructions Gently pull the beak forward to remove it. Note rubber grommets and other mounting Remove the two (2) fasteners just under the front edge of the beak. points for reinstallation. Remove (4) total OEM M5 screws from the front sub frame (2) on Install the upper bracket using an M4 driver and (4) M5 x 35mm bolts and each side.
- Page 5 BMW R 1200 GS W Upper Crash Bars Installation Instructions Hold your upper bars in place while you start threading the (4) M6 x 35 mm Reinstall the beak and side plastics (reverse steps 1-5) fasteners and washers. Add thread locker to each fastener, do not tighten all the way.
- Page 6 Product. To the extent allowed by law, AltRider shall not be held liable for any direct, indirect, punitive, incidental, special or consequential damages arising out of, or connected with, the use or misuse of this Product.
Need help?
Do you have a question about the R117-X-1001 and is the answer not in the manual?
Questions and answers