Wave Italy IMPETUS Installation, Use And Maintenance Manual page 21

• Connect the brake cylinder to the pedal.
• Reconnect the brake connector to the interface card.
!
The mechanical brake pedal reaction system is designed
according to a specific N/mm law which varies depending
on the spring pack fitted, thus increasing the realism and
the perceived braking quality. It is recommended to set a
linear law (not curve) when setting the simulation software
to prevent inconsistencies in the virtual braking behaviour.
2
The pedal can be adjusted in 2 positions. +/-10° variation
of the static position of the pedal.
2
21 - EN