Advertisement
PRODUCT INSTALLATION AND USAGE
The product can be used immediately after taken out of the
package (no installation is required).
FUNCTION BUTTONS
After plugged into a power outlet, the unit will beep and enter
the standby state (all the function indicators and buttons are off).
ON/OFF BUTTON
1.
In the standby state, press
unit is on, it will be in the following default state:
a. Fan is on low speed
it will run 3 seconds at medium speed before returning to
the speed it was turned off in.)
b. Cooling/humidifying
c. Mode is set to normal mode
d. Timer 1h, 2h, 4h, 8h is off.
e. Left/right oscillation
2. After you are done using the unit, press the
off all functions. The unit will then enter the standby state.
10
to turn the unit on. Once the
. (Whenever the unit is turned on,
is off.
.
is off.
button to turn
Hide quick links:
Advertisement
