Attachment To Clubsport Steering Wheel Formula V2 - Endor FANATEC ClubSport Magnetic Paddle Module Manual

Loosen the two bolts highlighted in red using the
1
2 mm Allen key (J).
Remove the rear cover.
2
Disconnect the standard shifter paddle cables.
3
NOTE: Carefully pull on the plastic connectors and not
the cables of the standard shifter paddle modules.
Loosen the shifter paddle bolts marked in red using a
4
2.5 mm Allen key (not included) for clearance to the
mounting bolts of the standard paddle modules.
Loosen the mounting bolts marked in red using a 4 mm
5
Allen key (I) to detach the standard paddle modules.
NOTE: Store the mounting bolts with the standard shifter
Insert the cables of the ClubSport Magnetic
6
Paddle Module before attaching the modules.
Once the cables are completely pushed through,
attach the modules using the included M5x12 mm
bolts (H) and tighten them.
7
ATTACHMENT TO
CLUBSPORT STEERING
5
WHEEL FORMULA V2
paddles for later use.