TUNING OPTIONS
In order to enter the Tuning Menu, press the Tuning button. To
navigate inside the menu, use the right FunkySwitch™. Press it up
or down to access 5 setup pro les. Press FunkySwitch™ right or
left to go through the various tuning options and rotate the
FunkySwitch™ to change option values.
Tuning Button
CENTRE CALIBRATION
If a centre calibration is needed (e.g: after rmware update
of ClubSport Wheel Base) when using the steering wheel
you need to enter the Tuning Mutton by pressing the Tuning Menu
Button. When the Tuning Menu is active, press the analogue stick
and the FunkySwitch™ at the same time as illustrated below to
calibrate the wheel centre.
SHIFTER CALIBRATION
FunkySwitch
In order to enter shifter calibration mode, simultaneously press
the Tuning Menu Button and the button highlighted below.
Tuning Button
QuickGuide
Fanatec
is a registered trademark of Endor AG
®
Designed and developed by Endor AG in Germany
E.ON-Allee 3 - 84036 Landshut - Germany
Telephone: +49 (871) 9221-122
Fax: +49 (871) 9221-221
Email: info.webshop@fanatec.com
Internet: www.fanatec.com - www.endor.ag
www.fanatec.com
Need help?
Do you have a question about the Fantec ClubSport BMW M3 GT2 and is the answer not in the manual?
Questions and answers