Download Print this page

STL VIBE S-VLF Instruction Manual

Siren

Download this manual

VIBE

SIREN

S-VLF

INSTRUCTION MANUAL

Table of Contents

Need help?

Do you have a question about the VIBE S-VLF and is the answer not in the manual?

Page 2 This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
Page 3: Maintenance
Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products.
Page 4: Specifications
STL control boxes is the best recommendation for triggering this function. * The STL Vibe is not a stand alone system. It must be paired with a 100/200 Watt Siren system to generate the actual tones. The Vibe works by modifying Siren tone inputs and broadcasting ultra low frequency outputs.
Page 5: Universal Mounting Bracket
VIBE ® SIREN Programming Low Frequency Broadcast Duration • On the Vibe Amp, there is a numbered turn dial with an arrow indicator and 3 green LED indicators. • As the dial is adjusted, the green LED indicators will change to confirm adjustments. •...