STL Apex Operation Manual And Instructions

150 watt siren

Advertisement

Quick Links

2809 Business Park Dr
Buda
Texas •78610
Phone 800.757.2581
Fax 844.894.2652
Email customerservice@speedtechlights.com
STL Apex
150 Watt Siren
®
Operation Manual and Instructions
Congratulations, you are the owner of a STL Apex
150 Watt Siren! Your siren is equipped with
®
the latest technology and features at the best value found industry wide, GUARANTEED. In
addition to that, your purchase comes with the STL 2 Year Warranty against any manufacture
defects that may occur with your bar. So please read this document carefully and call Customer
Service at 800-757-2581 Monday - Friday 8:30 AM - 4:30 PM central time if you need assistance.
We are available and happy to help!

Warnings and Notices for Users and Installers

WARNING: Take CAUTION when installing a siren system. Adequate hearing protection
for you and those within the immediate vicinity is mandatory since sirens emit extremely
loud warning tones. Loud noise can cause hearing damage and/or loss. Refer to OSHA
1910.95 prior to operating a siren unit for occupational noise exposure guidelines. .
This document must be delivered to and read by the end user and installer as it serves to
provide you with the required information for proper and safe use of your STL product. Before
operating this or any STL products the user and installer must read this manual all the way
through. You will find important information in this manual that could prevent property damage
and/or serious injury to the user and installer.
STL products are intended to alert pedestrians and other operators of the presence of
personnel, the operation of emergency vehicles, an emergency site, and any warning needs. This
does not ensure that pedestrians or drivers will react, heed, or observe emergency warning
signals. Nor does the use of emergency signals grant or ensure you the right of way. It is your
responsibility to make sure you can proceed safely before driving against traffic, entering an
intersection, responding to a high rate of speed, or walking on or around traffic lanes.
Your STL emergency vehicle devices should be tested daily to insure the device and all it's
functions are operating correctly. If you experience a malfunction contact STL's Customer
Service immediately for troubleshooting options, or a warranty or service claim. You must
ensure sure that the projection of the visual and audible is not blocked by vehicle components
(i.e.: open trunks, visors, compartment doors), vehicles, other obstructions, or people.
STL's sirens and other audible devices project sound in a forward direction and should be
installed in a forward direction that faces away from the occupants of the vehicle.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Apex and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for STL Apex

  • Page 1 STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
  • Page 2 SRS wiring, or sensors. All STL equipment needs to be mounted and installed according to the vehicle manufactures instructions and securely attached to a part of the vehicle of sufficient strength to withstand the forces applied to the equipment.
  • Page 3 - Never take any lights through a car wash. Use only water to clean the outer body/lens of your equipment. - Never use a pressure washer to clean any STL products. Inspect and test your product daily to insure it operates properly and is mounted correctly.
  • Page 4 - FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS, WARNING, NOTICES, AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR VEHICLE THAT WILL VOID WARRANTY AND/OR SERIOUS INJURY TO YOU AND YOUR PASSENGER. SUMMARY OF THE APEX® 150 WATT SIREN 3 Year Warranty (optional 5 Year Warranty upgrade available)* ...
  • Page 5 To protect against short circuits, a fuse is included by STL for all products. Do NOT use a fuse with a higher amp rating than the initial fuse included. Do NOT use Circuit Breaks with STL Products. Ground terminations should only be made directly...
  • Page 6  Both components must be installed in the interior of the vehicle. Wiring The STL Apex 150 Watt siren has a cable harness with four (4) cables coming from the  unit. These are your speaker and power cables. Solder and heat shrink each speaker cable to the cables provided in your siren system.
  • Page 7 Thank you for giving STL the opportunity to earn your business ®! and trust. Visit www.SpeedTechLights.com for any additional information and services regarding STL Warranty, Return Policy, Videos, or any other Customer Service needs you deem necessary. Shop with Confidence with SpeedTech Lights!

Table of Contents